331 results found for 'Diameter'. Prev |1|2|3|4 | Next | View 25 per page
Low relevance matches: 113 other results may be of interest to you. Show low relevance matches
331 results found for 'Diameter'. Prev |1|2|3|4 | Next | View 25 per page
Low relevance matches: 113 other results may be of interest to you. Show low relevance matches
Molymod Carbon Black 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD CARBON ATOM 4 HOLES
A pack of 10 black Carbon (sp3) atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-400-10
Molymod Nitrogen Blue 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD NITROGEN ATOM 4 HOLES
A pack of 10 blue Nitrogen atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-401-10
Molymod Oxygen Red 4 Holes 23mm Tetrahedral
23mm MOLYMOD OXYGEN ATOM 4 HOLES TETRAHEDRAL
A pack of 10 red oxygen atoms 23mm diameter and with 4 holes angled at 109° (tetrahedral). Used mainly to model water/ice molecules and included in most Molymod® student and teacher sets.
A quality, genuine Molymod® prod...
Order code: MA-402-10
Molymod Metal Grey 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD METAL ATOM 4 HOLES
A pack of 10 grey Metal atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-404-10
Molymod Silicon Grey 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD SILICON ATOM 4 HOLES
A pack of 10 grey Silicon atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-405-10
Molymod Phosphorous Purple 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD PHOSPHORUS ATOM 4 HOLES
A pack of 10 purple Phosphorus atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-407-10
Molymod Metal Platinum Grey 4 Holes 23mm 90 Square Planar
23mm MOLYMOD PLATINUM ATOM 4 HOLES
A pack of 10 grey Platinum atoms 23mm diameter and with 4 holes angled at 90° square planar.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-490-10
Molymod Phosphorus Purple 5 Holes 23mm 90/120 Tribipyramidal
23mm MOLYMOD PHOSPHORUS ATOM 5 HOLES
A pack of 10 purple Phosphorus atoms 23mm diameter and with 5 holes angled at 90° and 120° tribipyramidal.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-510-10
Molymod Carbon Black 5 Holes 23mm 90/120 Tribipyramidal
23mm MOLYMOD CARBON ATOM 5 HOLES
A pack of 10 black Carbon atoms 23mm diameter and with 5 holes angled at 90/120° tribipyramidal.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-511-10
Molymod Nitrogen Blue 5 Holes 23mm 90/120 Tribipyramidal
23mm MOLYMOD NITROGEN ATOM 5 HOLES
A pack of 10 blue Nitrogen atoms 23mm diameter and with 5 holes angled at 90° and 120° tribipyramidal.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-512-10
Molymod Metal Grey 5 Holes 23mm 90/120 Tribipyramidal
23mm MOLYMOD METAL ATOM 5 HOLES
A pack of 10 grey Metal atoms 23mm diameter and with 5 holes angled at 90/120° tribipyramidal.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-513-10
Molymod Generic Atom Beige 5 Hole
23mm MOLYMOD GENERIC BEIGE DSP3 ATOM 5 HOLES
A pack of 10 beige dsp3 hybrid atoms 23mm diameter and with 5 holes angled at 90° and 120° tribipyramidal.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: MA-515-10
Molymod Metal Grey 6 Holes 23mm 90 Octahedral
23mm MOLYMOD METAL ATOM 6 HOLES
A pack of 10 grey Metal atoms 23mm diameter and with 6 holes angled at 90° octahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-610-10
Molymod Halogen Green 6 Holes 23mm 90 Octahedral
23mm MOLYMOD HALOGEN ATOM 6 HOLES
A pack of 10 green Halogen atoms 23mm diameter and with 6 holes angled at 90° octahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-612-10
Molymod Sulphur 6 Hole Yellow
23mm MOLYMOD SULPHUR ATOM 6 HOLES
A pack of 10 yellow Sulphur atoms 23mm diameter and with 6 holes angled at 90° octahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-613-10
Molymod Metal Copper 6 Holes 23mm 90 Octahedral
23mm MOLYMOD METAL COPPER ATOM 6 HOLES
A pack of 10 Copper atoms 23mm diameter and with 6 holes angled at 90° octahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-619-10
IEC Ball Bearings Steel 20 each of 3 different sizes
IEC STEEL BALLS 20 EACH OF 3 SIZES
Used for rolling, colliding, falling and other experiments in basic science and physics, the IEC set of precision steel balls includes:
• 20 x 12.7mm diameter steel balls
• 20 x 16mm diameter steel balls
• 20 x 19.1mm diameter steel b...
Order code: MF0205-001
IEC Free Fall Mechanical Release 1m without Timer
IEC FREE FALL MECHANICAL RELEASE 1 METRE WITHOUT TIMER
This version of the IEC Free Fall apparatus has a 1m fall and uses a mechanical release for the 3 balls of different sizes and materials. The upper platform is adjustable for position on the 1m vertical rail so that e...
Order code: MF1871-301
IEC Free Fall Mechanical Release 1m with Timer
IEC FREE FALL MECHANICAL RELEASE 1 METRE WITH TIMER
This version of the IEC Free Fall apparatus has a 1m fall and uses a mechanical release for the 3 balls of different sizes and materials. The upper platform is adjustable for position on the 1m vertical rail so that expe...
Order code: MF1871-301A
IEC Free Fall Solenoid Release 1m without Timer
IEC FREE FALL SOLENOID RELEASE 1 METRE WITHOUT TIMER
This version of the IEC Free Fall apparatus has a 1m fall and uses a solenoid release for the 2 steel balls of different sizes. The upper platform is adjustable for position on the 1m vertical rail so that experiments c...
Order code: MF1871-401
IEC Free Fall Solenoid Release 1m with Timer
IEC FREE FALL SOLENOID RELEASE 1 METRE WITH TIMER
This version of the IEC Free Fall apparatus has a 1m fall and uses a solenoid release for the 2 steel balls of different sizes. The upper platform is adjustable for position on the 1m vertical rail so that experiments can ...
Order code: MF1871-401A
IEC Free Fall Solenoid Release 1.5m without Timer
IEC FREE FALL SOLENOID RELEASE 1.5 METRE WITHOUT TIMER
This version of the IEC Free Fall apparatus has a 1.5m fall and uses a solenoid release for the 2 steel balls of different sizes. The upper platform is adjustable for position on the 1.5m vertical rail so that experim...
Order code: MF1871-501
IEC Free Fall Solenoid Release 1.5m with Timer
IEC FREE FALL SOLENOID RELEASE 1.5 METRE WITH TIMER
This version of the IEC Free Fall apparatus has a 1.5m fall and uses a solenoid release for the 2 steel balls of different sizes. The upper platform is adjustable for position on the 1.5m vertical rail so that experiment...
Order code: MF1871-501A
IEC Hookes Law Springs 5 Non-Proportional
IEC HOOKE'S LAW NON-PROPORTIONAL SPRINGS SET 5
The IEC Hooke's Law Non-Proportional Spring Set is made up of 5 springs which are NOT relative to one another in wire thickness, wire diameter and spring length. All 5 springs are tension springs with an 'eye' at each end.
...
Order code: MF1918-001
IEC Hookes Law Springs 6 Proportional
IEC HOOKE'S LAW PROPORTIONAL SPRINGS SET 6
The IEC Hooke's Law Proportional Spring Set is made up of 6 springs which have convenient predictable ratios relative to one another in wire thickness, wire diameter and spring length. All 6 springs are tension springs with an 'e...
Order code: MF1918-101
IEC Manometer +/-300mm
IEC LARGE DEMONSTRATION MANOMETER
A high quality demonstration manometer with very clear scales in an extremely sturdy aluminium frame fitted with a ring for hanging on a wall. The large 12mm diameter clear PVC hose is formed into a 'U' tube with a 400mmL scale mounted be...
Order code: MF2095-001
IEC Pendulum Bob Brass Set
IEC BRASS PENDULUM BOB SET OF 3
A simple set of three brass pendulum bobs:
• 1 x 25mm brass bob
• 1 x 20mm brass bob
• 1 x 12mm brass bob
Each bob has a small hold drilled through with a larger hole counterbored on one side. The knot in a string can be pulled up int...
Order code: MF2290-001
IEC Pendulum Bob Brass 25mm
IEC BRASS PENDULUM BOB 25mm
A 25mm brass bob with a small hold drilled through and a larger hole counterbored on one side. The knot in a string can be pulled up into the larger hole to ensure it is hidden and tamper-proof.
The diameter is nominal only and the actual di...
Order code: MF2291-001
IEC Pendulum Bob Brass 20mm
IEC BRASS PENDULUM BOB 20mm
A 20mm brass bob with a small hold drilled through and a larger hole counterbored on one side. The knot in a string can be pulled up into the larger hole to ensure it is hidden and tamper-proof.
The diameter is nominal only and the actual di...
Order code: MF2292-001
IEC Pendulum Bob Brass 12.5mm
IEC BRASS PENDULUM BOB 12.5mm
A 12.5mm brass bob with a small hold drilled through and a larger hole counterbored on one side. The knot in a string can be pulled up into the larger hole to ensure it is hidden and tamper-proof.
The diameter is nominal only and the actua...
Order code: MF2293-001
IEC Pendulum Bob Steel 20mm
IEC STEEL PENDULUM BOB 20mm
A 20mm steel bob with a small hold drilled through and a larger hole counterbored on one side. The knot in a string can be pulled up into the larger hole to ensure it is hidden and tamper-proof.
The diameter is nominal only and the actual di...
Order code: MF2294-001
IEC Pendulum Bob Plastic 20mm
IEC PLASTIC PENDULUM BOB 20mm
A 20mm plastic bob with a small hold drilled through and a larger hole counterbored on one side. The knot in a string can be pulled up into the larger hole to ensure it is hidden and tamper-proof.
The diameter is nominal only and the actua...
Order code: MF2295-001
IEC Scale Pan Brass with Hook
IEC BRASS SCALE PAN WITH CORD & HOOK
A traditional 75mm diameter x 12mm deep brass pan with three point suspension and a strong hook as used in IEC pulley sheaves.
The three cords that join the pan to the hook are made from miniature chain.
MF3722-001 is a similar alu...
Order code: MF3721-001
IEC Scale Pan Plastic with Hook
IEC PLASTIC SCALE PAN WITH HOOK
A very unique and low cost 100mm diameter x 12mm deep scale pan that is moulded from black nylon. The sides of the moulding are hinged so that they can be pulled together to form a strong hook. There are no cords or separate hook so no loos...
Order code: MF3723-001
IEC 500g Weight Set with Slotted Brass 50g Weights
IEC 500g WEIGHT SET WITH 9 50g SLOTTED BRASS WEIGHTS ON 50g CARRIER
A set of nine 50g solid brass discs with a shaped slot to fit the 5mm diameter rod of a 50g brass carrier.
A strong hook is fitted permanently to the top of the carrier.
Total weight is 500g comprise...
Order code: MF4300-001
IEC Weight Brass Slotted 50g
IEC 50g SLOTTED BRASS WEIGHT
An individual 50g solid brass disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4300-002
IEC Weight Brass Slotted 25g
IEC 25g SLOTTED BRASS WEIGHT
An individual 25g solid brass disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4300-005
IEC Weight Brass Slotted 20g
IEC 20g SLOTTED BRASS WEIGHT
An individual 20g solid brass disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4300-006
IEC Weight Set of 9 Brass Slotted 100g
IEC 100g SLOTTED BRASS WEIGHT SET ON CARRIER
A set of nine 100g solid brass discs with a shaped slot to fit the 5mm diameter rod of a 100g brass carrier.
A strong hook is fitted permanently to the top of the carrier.
The set of nine 100g brass weights plus the 100g ca...
Order code: MF4301-001
IEC Weight Brass Slotted 100g
IEC 100g SLOTTED BRASS WEIGHT
An individual 100g solid brass disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4301-002
IEC Weight Brass Slotted 5g
IEC 5g SLOTTED BRASS WEIGHT
An individual 5g solid brass cropped disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4302-002
IEC Weight Set of 9 Brass Slotted 10g
IEC 10g SLOTTED BRASS WEIGHT SET ON CARRIER
A set of nine 10g solid brass discs with a shaped slot to fit the 5mm diameter rod of a 10g aluminium carrier.
A strong hook is fitted permanently to the top of the carrier.
The set of nine 10g brass weights plus the 10g ca...
Order code: MF4303-001
IEC Weight Brass Slotted 10g
IEC 10g SLOTTED BRASS WEIGHT
An individual 10g solid brass cropped disc with a shaped slot to fit the 5mm diameter rod of a standard IEC slotted weight carrier.
All IEC weights and carriers are stamped with the weight and have an accuracy of 1%.
Order code: MF4303-002
IEC Weight Set of 5 Brass Slotted
IEC SLOTTED BRASS WEIGHT SET OF 5
A set of 5 solid brass discs with a shaped slot to fit the 5mm diameter rod of
a standard IEC slotted weight carrier (not included). Total weight is 200g.
Included weights are:
• 1 x 10g
• 2 x 20g
• 1 x 50g
• 1 x 100g
A...
Order code: MF4304-001
IEC Weight Set of 3 Brass Slotted
IEC SLOTTED BRASS WEIGHT SET OF 3
A set of 3 solid brass discs with a shaped slot to fit the 5mm diameter rod of
a standard IEC slotted weight carrier (not included). Total weight is 35g.
Included weights are:
• 1 x 5g
• 1 x 10g
• 1 x 20g
All weights and...
Order code: MF4304-101
IEC Wheel and Axle 2 Sizes Pulley
IEC SIMPLE WHEEL AND AXLE PULLEY
The 'Wheel and Axle' is a simple pair of pulleys made from very strong 5ply timber and sealed against moisture. The pulleys have 150mm and 75mm diameters and are fixed together as one dual diameter pulley, with a central bearing so it can ...
Order code: MF4620-001
IEC Tensile Test Machine
IEC TENSILE TEST MACHINE
The IEC Tensile Test Machine is a simple but effective system for measuring the tensile strength of metals. Wire is used so that the forces involved are small and can easily be applied in the classroom. The machine provides three different anchor ...
Order code: MF4665-001
Vernier Melt Station
VERNIER MELT STATION
Vernier's Melt Station connects to a Vernier interface to accurately determine the melting temperature of solid substances.
Features:
• Accurate results using built-in RTD over a range of 30°C to 260°C
• High-quality 6X viewing lens for cl...
Order code: MLT-BTA
Vernier Non-Brass Replacement Resistivity Rod Set
VERNIER NON-BRASS REPLACEMENT RESISTIVITY ROD SET.
These four rods have a diameter of about 3.2 mm and are 46 cm long. They replace or supplement the non-brass rods for the Resistivity Set used in our Advanced Physics with Vernier – Beyond Mechanics lab manual.
Use th...
Order code: OT-RRS
IEC Air Track Spring Roll 60mm Glider Joiners
A replacement spring for an IEC Air Track used to join two gliders together.
The coiled spring length is 60mm, the overall length including end loops is 80mm. Spring diameter is approximately 10mm.
Order code: PA0130-038B
IEC Circular Motion Rubber Ball 4g
IEC CIRCULAR MOTION RUBBER BALL 4g
A replacement 20mm diameter x 4g special rubber mass with measurement reference line, mass in grams marked and loop for attachment to a light chain or cord for the MF0848-001 IEC Circular Motion Kit.
Order code: PA0848-012
IEC Circular Motion Rubber Ball 8g
IEC CIRCULAR MOTION RUBBER BALL 8g
A replacement 25mm diameter x 8g special rubber mass with measurement reference line, mass in grams marked and loop for attachment to a light chain or cord for the MF0848-001 IEC Circular Motion Kit.
Order code: PA0848-014
IEC Circular Motion Rubber Ball 16g
IEC CIRCULAR MOTION RUBBER BALL 16g
A replacement 32mm diameter x 16g special rubber mass with measurement reference line, mass in grams marked and loop for attachment to a light chain or cord for the MF0848-001 IEC Circular Motion Kit.
Order code: PA0848-016
IEC Circuit Board Electrode Holder Disc 75mm
IEC CIRCUIT BOARD ELECTRODE HOLDER DISC
A replacement 75mm diameter insulating disc with holes for electrodes. It fits the electrode holder of the discontinued EM0890-001 IEC Worcester pattern circuit board kit.
Order code: PA0890-015
IEC Collision In 2 Dimensions Steel Balls
IEC COLLISION IN 2 DIMENSIONS SPARE STEEL BALLS
A spare pair of 16mm diameter steel balls for the MF1000-001 IEC Collision in 2 Dimensions Kit.
Order code: PA1000-003
IEC Constant Volume Thermometer Shape Tube
IEC CONSTANT VOLUME THERMOMETER L-SHAPED GLASS TUBE
A spare L-shaped glass tube that joins to the glass bulb with rubber joiner (not included) for the MF1005-001 IEC Constant Volume Thermometer (CVT). The larger diameter section has a reference line marked on it.
Order code: PA1005-003
IEC Electromagnetic Induction Spare Rod Magnet
IEC ELECTROMAGNETIC INDUCTION SPARE ROD MAGNET
A spare 12mm diameter x 200mm long large Alnico rod magnet for the EM1740-001 Electromagnetic Induction Apparatus.
Order code: PA1740-002
IEC Free Fall Mechanical Release Balls
IEC FREE FALL MECHANICAL RELEASE BALLS
A replacement set of 3 balls of different sizes and different materials for the MF1871-001 IEC Free Fall apparatus with mechanical release. Each ball has a threaded hole for storage and for releasing.
Included:
• 20mm diam...
Order code: PA1871-331
IEC Free Fall Solenoid Release Steel Balls
IEC FREE FALL SOLENOID RELEASE STEEL BALLS
A replacement set of 2 stainless steel balls for any IEC Free Fall Solenoid Release Apparatus.
Included:
• 15mm diameter stainless steel ball
• 20mm diameter stainless steel ball
Order code: PA1871-412
IEC Helmholtz Coil with Foot 400Tx1A
IEC HELMHOLTZ COIL WITH FOOT 400Tx1A
A spare single precision made 150mm diameter Helmholtz coil with 400 turns of fine wire wound on a heat resistant polycarbonate former with feet to rest on the table and to fit over a 0.5m rule.
The coil has 4mm spin free IEC termin...
Order code: PA1915-010
IEC Induction Kit Compass
IEC HODSON INDUCTION KIT COMPASS
An approximately 30mm diameter magnetic compass for detecting magnetic fields with the EM1973-001 IEC Hodson Induction Kit.
Order code: PA1973-064
IEC Knob Plastic Black Notched 15mmDx6mmd
IEC 15mm BLACK PLASTIC NOTCHED KNOB 6mm SHAFT
IEC 15mm diameter black plastic knob with notched skirt to fit 6mm diameter shafts (not 1/4" diameter).
A replacement for very small knobs used on small IEC instruments.
Order code: PA1993-001
IEC Knob Plastic Black Notched 20mmDx6mmd
IEC 20mm BLACK PLASTIC NOTCHED KNOB 6mm SHAFT
IEC 20mm diameter black plastic knob with notched skirt to fit 6mm diameter shafts (not 1/4" diameter).
A replacement for small knobs used on general IEC instruments.
Order code: PA1993-002
IEC Knob Plastic Black Notched 24mmDx6mmd
IEC 24mm BLACK PLASTIC NOTCHED KNOB 6mm SHAFT
IEC 24mm diameter black plastic knob with notched skirt to fit 6mm diameter shafts (not 1/4" diameter).
A replacement for medium knobs used on IEC instruments.
Order code: PA1993-003
IEC Knob Plastic Black Notched 35mmDx6mmd
IEC 35mm BLACK PLASTIC NOTCHED KNOB 6mm SHAFT
IEC 35mm diameter black plastic knob with notched skirt to fit 6mm diameter shafts (not 1/4" diameter).
A replacement for large knobs used on IEC instruments such as LB2633-001 power supply switch.
Order code: PA1993-004
IEC Knob Plastic Silver Centre 19mmDx6mmd
IEC 20mm BLACK PLASTIC NOTCHED KNOB 6.4mm SHAFT
IEC 20mm diameter black plastic knob with white dot and notched skirt to fit 1/4" diameter shafts (not 6mm diameter).
A replacement for small knobs used on general IEC instruments.
Order code: PA1994-001
IEC Knob Plastic Silver Centre 26mmDx6mmd
IEC 24mm BLACK PLASTIC NOTCHED KNOB 6.4mm SHAFT
IEC 24mm diameter black plastic knob with white dot and notched skirt to fit 1/4" diameter shafts (not 6mm diameter).
A replacement for medium knobs used on general IEC instruments.
Order code: PA1994-002
IEC Knob Plastic Silver Centre 33mmDx6mmd
IEC 35mm BLACK PLASTIC NOTCHED KNOB 6.4mm SHAFT
IEC 35mm diameter black plastic knob with white dot and notched skirt to fit 1/4" diameter shafts (not 6mm diameter).
A replacement for large knobs used on IEC instruments.
Order code: PA1994-003
IEC Microwave Large Lens With Support Feet
IEC MICROWAVE APPARATUS LARGE LENS WITH SUPPORT FEET
Replacement 167mm diameter moulded plastic lens with support feet for the SW2140-001 IEC Microwave Apparatus.
This product replaces earlier wax versions of the lens.
Order code: PA2140-008
IEC Microphone + Lead and Plug
IEC MICROWAVE APPARATUS MICROPHONE WITH LEAD AND PLUG
Replacement dynamic (moving coil) type microphone with on/off switch, cable and 3.5mm diameter phone plug for the SW2140-001 IEC Microwave Apparatus.
Also suitable for use with the LB3756-101 IEC Wave Lab Signal Ge...
Order code: PA2140-013
IEC Optical Bench Lens Holder Base for 50mm Lens
IEC OPTICAL BENCH LENS HOLDER AND BASE
A combination of the PA2240-026 plastic slider and PA2240-035 lens holder
for the HL2240-001 IEC Optical Bench
The slider gently grips the sides of the bench rail and holds the...
Order code: PA2240-030
IEC Optical Bench Transparency with Hole Large
IEC OPTICAL BENCH TRANSPARENCY WITH LARGE HOLE
Individual transparency with a 8mm diameter large size aperture
for the HL2240-001 IEC Optical Bench
Order code: PA2240-310
IEC Optical Bench Transparency with Hole Medium
IEC OPTICAL BENCH TRANSPARENCY WITH MEDIUM HOLE
Individual transparency with a 5mm diameter medium size aperture
for the HL2240-001 IEC Optical Bench
Order code: PA2240-320
IEC Optical Bench Transparency with Hole Small
IEC OPTICAL BENCH TRANSPARENCY WITH SMALL HOLE
Individual transparency with a 3mm diameter small size aperture
for the HL2240-001 IEC Optical Bench
Order code: PA2240-330
IEC Optical Bench Transparency Radial Angle
IEC OPTICAL BENCH TRANSPARENCY RADIAL ANGLE
Individual transparency showing a graduated circular scale or targets 5mm and 10mm in diameter
for the HL2240-001 IEC Optical Bench
Order code: PA2240-340
IEC Potentiometer Wire Wound 2.5K ohms
IEC POTENTIOMETER WIRE WOUND 2.5kOHMS FOR EHV POWER SUPPLY
A replacement large ceramic-style Potentiometer 2.5kohms x 50W with 6mm diameter shaft as used inside the LB2615-001 IEC EHV power supply.
Order code: PA2615-010
IEC Lead Shield for Radioactive Sources
IEC LEAD SHIELD FOR EDUCATIONAL GRADE RADIOACTIVE SOURCES
These lead shields provide safer storage for school grade Radioactive Sources mounted in a 25mm diameter x 5mm thick plastic disc with radioactive printed symbol.
Although radioactivity level is very low, scho...
Order code: PA2667-060
IEC Stroboscope Motorised Disc Set of 3
IEC MOTORISED VARIABLE SPEED STROBOSCOPE DISC SET 4
A spare set of 4 x 200mm diameter black board discs for the LB3854-001 IEC Motorised Variable Speed Stroboscope.
Includes one disc each of 4, 8 and 12 slots and a blank.
Order code: PA3854-010
IEC Switch Rotary 6 Position for IEC Power Supplies
IEC 6 POSITION ROTARY SWITCH FOR IEC POWER SUPPLIES
A replacement 6 position low voltage rotary switch for voltage selection on the LB2633-001 and various other IEC Power Supplies.
The switch has a 6mm diameter shaft (not 1/4") so a 6mm knob should always be fitted. A 1...
Order code: PA3931-001
IEC Tensile Test M/C Wire Iron 25g Reel 0.28mm dia 32g
IEC TENSILE TEST MACHINE IRON WIRE 25g REEL
A 25g replacement roll of 0.28mm diameter (32swg) iron wire for the IEC MF4665-005 IEC Tensile Test Machine.
Order code: PA4665-005
IEC Tensile Test M/C Wire Brass 25g Reel 0.32mm dia 30g
IEC TENSILE TEST MACHINE BRASS WIRE 25g REEL
A 25g replacement roll of 0.32mm diameter (30swg) brass wire for the IEC MF4665-005 IEC Tensile Test Machine.
Order code: PA4665-010
IEC Tensile Test M/C Wire Copper 28g Reel 0.37mm dia 28g
IEC TENSILE TEST MACHINE COPPER WIRE 25g REEL
A 25g replacement roll of 0.37mm diameter (28swg) copper wire for the IEC MF4665-005 IEC Tensile Test Machine.
Order code: PA4665-015
IEC Wire Copper Bare 14 SWG 2.0mm 50g Reel
IEC BARE COPPER WIRE 14SWG, 2.00mmD, 50g Reel
A 50g reel of 14 standard wire gauge bare copper wire that has a diameter of 2.00mm and is approximately 1.7m long.
Order code: PA4769-001
IEC Wire Copper Bare 16 SWG 1.62mm 50g Reel
IEC BARE COPPER WIRE 16SWG, 1.62mmD, 50g Reel
A 50g reel of 16 standard wire gauge bare copper wire that has a diameter of 1.62mm and is approximately 2.7m long.
Order code: PA4770-001
IEC Wire Copper Bare 18 SWG 1.22mm 50g Reel
IEC BARE COPPER WIRE 18SWG, 1.22mmD, 50g Reel
A 50g reel of 18 standard wire gauge bare copper wire that has a diameter of 1.22mm and is approximately 4.7m long.
Order code: PA4771-001
IEC Wire Copper Bare 20 SWG 0.91mm 50g Reel
IEC BARE COPPER WIRE 20SWG, 0.91mmD, 50g Reel
A 50g reel of 20 standard wire gauge bare copper wire that has a diameter of 0.91mm and is approximately 8.5m long.
Order code: PA4772-001
IEC Wire Copper Bare 22 SWG 0.71mm 50g Reel
IEC BARE COPPER WIRE 22SWG, 0.71mmD, 50g Reel
A 50g reel of 22 standard wire gauge bare copper wire that has a diameter of 0.71mm and is approximately 14.1m long.
Order code: PA4773-001
IEC Wire Copper Bare 24 SWG 0.56mm 50g Reel
IEC BARE COPPER WIRE 24SWG, 0.56mmD, 50g Reel
A 50g reel of 24 standard wire gauge bare copper wire that has a diameter of 0.56mm and is approximately 22.7m long.
Order code: PA4774-001
IEC Wire Copper Bare 26 SWG 0.46mm 50g Reel
IEC BARE COPPER WIRE 26SWG, 0.46mmD, 50g Reel
A 50g reel of 26 standard wire gauge bare copper wire that has a diameter of 0.46mm and is approximately 34m long.
Order code: PA4775-001
IEC Wire Copper Bare 28 SWG 0.38mm 50g Reel
IEC BARE COPPER WIRE 28SWG, 0.38mmD, 50g Reel
A 50g reel of 28 standard wire gauge bare copper wire that has a diameter of 0.38mm and is approximately 50m long.
Order code: PA4776-001
IEC Wire Copper Bare 30 SWG 0.31mm 50g Reel
IEC BARE COPPER WIRE 30SWG, 0.31mmD, 50g Reel
A 50g reel of 30 standard wire gauge bare copper wire that has a diameter of 0.31mm and is approximately 71m long.
Order code: PA4777-001
IEC Wire Copper Enamel 18 SWG 1.22mm 50g Reel
IEC ENAMEL COPPER WIRE 18SWG, 1.22mmD, 50g Reel
A 50g reel of 18 standard wire gauge enamel insulated copper wire that has a diameter of 1.22mm and is approximately 4.7m long.
Order code: PA4781-001
IEC Wire Copper Enamel 20 SWG 0.91mm 50g Reel
IEC ENAMEL COPPER WIRE 20SWG, 0.91mmD, 50g Reel
A 50g reel of 20 standard wire gauge enamel insulated copper wire that has a diameter of 0.91mm and is approximately 8.5m long.
Order code: PA4782-001
IEC Wire Copper Enamel 22 SWG 0.71mm 50g Reel
IEC ENAMEL COPPER WIRE 22SWG, 0.71mmD, 50g Reel
A 50g reel of 22 standard wire gauge enamel insulated copper wire that has a diameter of 0.71mm and is approximately 14.1m long.
Order code: PA4783-001
IEC Wire Copper Enamel 24 SWG 0.56mm 50g Reel
IEC ENAMEL COPPER WIRE 24SWG, 0.56mmD, 50g Reel
A 50g reel of 24 standard wire gauge enamel insulated copper wire that has a diameter of 0.56mm and is approximately 22.7m long.
Order code: PA4784-001
IEC Wire Copper Enamel 26 SWG 0.46mm 50g Reel
IEC ENAMEL COPPER WIRE 26SWG, 0.46mmD, 50g Reel
A 50g reel of 26 standard wire gauge enamel insulated copper wire that has a diameter of 0.46mm and is approximately 34m long.
Order code: PA4785-001
IEC Wire Copper Enamel 28 SWG 0.38mm 50g Reel
IEC ENAMEL COPPER WIRE 28SWG, 0.38mmD, 50g Reel
A 50g reel of 28 standard wire gauge enamel insulated copper wire that has a diameter of 0.38mm and is approximately 50m long.
Order code: PA4786-001
IEC Wire Copper Enamel 30 SWG 0.31mm 50g Reel
IEC ENAMEL COPPER WIRE 30SWG, 0.31mmD, 50g Reel
A 50g reel of 30 standard wire gauge enamel insulated copper wire that has a diameter of 0.31mm and is approximately 71m long.
Order code: PA4787-001
IEC Wire Copper Enamel 32 SWG 0.28mm 50g Reel
IEC ENAMEL COPPER WIRE 32SWG, 0.28mmD, 50g Reel
A 50g reel of 32 standard wire gauge enamel insulated copper wire that has a diameter of 0.28mm and is approximately 94m long.
Order code: PA4788-001
Brush Bristle Test Tube 20x50x190mm
Long handled brushes perfect for cleaning burettes, test tubes and narrow pieces of lab equipment.
Size: Bristles: 20 diameter x 50mm plus 30mm long bristle tip; overall length 190mm.
Sold as a pack of 10.
Order code: SC14452
331 results found for 'Diameter'. Prev |1|2|3|4 | Next | View 25 per page