51 low relevance results shown for 'GO-LINK'. | View 25 per page
Showing low relevance matches only. Return to normal search results
51 low relevance results shown for 'GO-LINK'. | View 25 per page
Showing low relevance matches only. Return to normal search results
Vernier Power Amplifier
VERNIER POWER AMPLIFIER
Use the Vernier Power Amplifier as a power supply for DC and AC circuit investigations or to drive devices such as speakers, lamps and small DC motors.The Power Amplifier takes small input signal – from a LabQuest 2, original LabQuest, or computer ...
Order code: PAMP
Vernier Stainless Steel Temperature Probe
VERNIER STAINLESS STEEL TEMPERATURE PROBE
Vernier's Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor with a sealed stainless steel shaft and tip that can be used in organic liquids, salt solutions, acids and bases. Use it as you would use ...
Order code: TMP-BTA
Vernier pH Sensor
VERNIER PH SENSOR
Vernier's general purpose pH sensor can be used across disciplines including chemistry, biology, middle school science and environmental science.
Use the pH Sensor just as you would a traditional pH meter with the additional advantages of automated da...
Order code: PH-BTA
Vernier Tris Compatible Flat pH Sensor
VERNIER TRIS COMPATIBLE FLAT PH SENSOR
The Tris-Compatible Flat pH Sensor is highly versatile. Because the glass membrane is flat instead of a bulb, it is more durable, easier to clean and allows for flat surface measurements or smaller sample sizes. It features a sealed,...
Order code: FPH-BTA
Vernier Pyranometer - Solar Power Meter
VERNIER PYRANOMETER
Vernier's Pyranometer measures the power of electromagnetic radiation. It is sensitive to near infrared, visible and UV radiation, where 90% of solar energy is concentrated. It reads in watts per square metre so it is great for experiments with solar c...
Order code: PYR-BTA
Vernier Anemometer
VERNIER ANEMOMETER
The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30m/s. The Anemometer fits in your palm for wind study measurements in the field.
A standard camera mounting threaded hole on the back takes the inc...
Order code: ANM-BTA
Vernier Light Sensor - Lux Meter
VERNIER LIGHT SENSOR
Vernier's Light Sensor approximates the human eye in spectral response and can be used over three different illumination ranges selected with a switch. Use it for inverse square law experiments, studying polarizers, reflectivity or solar energy.
Th...
Order code: LS-BTA
Vernier Conductivity Probe
VERNIER CONDUCTIVITY PROBE
The Vernier Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology and environmental science.
Vernier's conductivity probe has three ranges provid...
Order code: CON-BTA
Vernier Goniometer
VERNIER GONIOMETER
The Vernier Goniometer measures the angle of a joint such as the knee or elbow and can be used to analyze the range of motion of a limb during different types of physical activity.
• A set of elastic straps are used to secure the sensor to the subjec...
Order code: GNM-BTA
Vernier Salinity Sensor
VERNIER SALINITY SENSOR
The Vernier Salinity Sensor uses density and electrical conductivity to measure salinity. The Salinity Sensor easily and precisely measures the total dissolved salt content in an aqueous solution. Measure water with a wide variety of salinities, fr...
Order code: SAL-BTA-EB
Vernier Surface Temperature Probe
VERNIER SURFACE TEMPERATURE PROBE
Vernier's Surface Temperature Sensor is designed for use in situations in which low thermal mass or flexibility is required, or for a skin temperature measurement. It has an exposed thermistor that results in an extremely rapid response t...
Order code: STS-BTA
Vernier Turbidity Sensor
VERNIER TURBIDITY SENSOR
Vernier's Turbidity Sensor can be used in Chemistry, Biology, Water Quality, Physical Science and Earth Science studies to measure the turbidity of freshwater or seawater samples. Its small, sleek design and simple set up make it easy to use at th...
Order code: TRB-BTA
Vernier Magnetic Field Sensor
VERNIER MAGNETIC FIELD SENSOR
Vernier's Magnetic Field Sensor can be used to study the field around permanent magnets, coils and electrical devices. It features a rotating sensor tip to measure both transverse and longitudinal magnetic fields.
The sensor uses a Hall ef...
Order code: MG-BTA
Vernier Voltage Probe
VERNIER VOLTAGE PROBE
Vernier's Voltage Probe is a bipolar sensor that measures direct voltage. The black lead is grounded along with the interface and the sensor reports the potential difference between the red lead and ground. It can be used just like a standard volt me...
Order code: VP-BTA
Vernier 30 Volt Voltage Probe
VERNIER 30 VOLT VOLTAGE PROBE
This sensor is suitable for measuring voltages in the range of -30 to +30 volts. Use this sensor in experiments that involve voltages larger than 10 volts, such as when working with large solar panels. Since this voltage probe covers such a ...
Order code: 30V-BTA
Vernier Current Probe
VERNIER CURRENT PROBE
The Current Probe is designed for exploring the basic principles of electricity. Use the Current Probe to measure currents in low-voltage AC and DC circuits. This system is ideal for use in most "battery and bulb" circuits. Use it with the Differenti...
Order code: DCP-BTA
Vernier High Current Sensor
VERNIER HIGH CURRENT SENSOR
Use Vernier's High Current Sensor in experiments that involve currents larger than 1A, such as solar panels, hand generators and other alternative energy projects.
The High Current Sensor has a range of ±10 A. Current is measured with a Hall...
Order code: HCS-BTA
Vernier Soil Moisture Sensor
VERNIER SOIL MOISTURE SENSOR
The Soil Moisture Sensor uses capacitance to measure the water content of soil by measuring the dielectric permittivity of the soil - a function of the water content. Simply insert this rugged sensor into the soil to be tested, and the volumet...
Order code: SMS-BTA
Vernier CO2 Gas Sensor
VERNIER CO2 GAS SENSOR
The Vernier CO2 Gas Sensor equips students to easily monitor changes in CO2 levels occurring in respiration of organisms ranging from peas to humans.
The sensor measures gaseous carbon dioxide levels from 0 to 100,000 ppm in two ranges:
• Low ran...
Order code: CO2-BTA
Vernier Colorimeter
VERNIER COLORIMETER
Vernier's Colorimeter is great for Beer’s law experiments, determining the concentration of unknown solutions or studying changes in concentration vs. time.
This 4-wavelength colorimeter measures the amount of light transmitted through a sample at a u...
Order code: COL-BTA
Vernier UVA Sensor
VERNIER UVA SENSOR
The Vernier UVA Sensor is an ultraviolet light sensor that responds primarily to UVA radiation (approximately 320 to 390nm).
It is ideal for experiments using UV lamps.
UVB-BTA Vernier UVB Sensor ...
Order code: UVA-BTA
Vernier UVB Sensor
VERNIER UVB SENSORS
The Vernier UVB Sensor is an ultraviolet light sensor that responds primarily to UVB radiation (approximately 290 to 320nm).
It is ideal for experiments using sunlight as your UV source and is the sensor recommended for the UV experiments in Vernier l...
Order code: UVB-BTA
Vernier Dual-Range Force Sensor
VERNIER DUAL RANGE FORCE SENSOR
The Vernier Dual-Range Force Sensor is a general purpose sensor for measuring pushing and pulling forces. Study friction, simple harmonic motion, impact in collisions or centripetal force.
Two ranges allow the measurement of forces as sma...
Order code: DFS-BTA
Vernier Gas Pressure Sensor
VERNIER GAS PRESSURE SENSOR
Vernier's Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle’s law yet it is sensitive enough to conduct vapour-pressure or pressure-temperature experiments.
Biology teachers can us...
Order code: GPS-BTA
Vernier Low-g Accelerometer
VERNIER LOW-G ACCELEROMETER
Vernier's most popular accelerometer is the best choice for most acceleration experiments including Newton’s second law, simple harmonic motion and the relationship between acceleration and force. It can also be used to study one-dimensional mo...
Order code: LGA-BTA
Vernier O2 Oxygen Gas Sensor
VERNIER O2 GAS SENSOR
Vernier's O2 Gas Sensor measures oxygen concentration in air and is temperature compensated for use in different environments. It has a wide measurement range allowing it to be used to study human and cellular respiration.
The O2 Gas Sensor can b...
Order code: O2-BTA
Vernier 25-g Accelerometer
VERNIER 25-g ACCELEROMETER
The 25-g Accelerometer is best suited for studying large, one-dimensional accelerations such as collisions, rocket launches or experiments with crash test dummies.
Suggested Experiments:
• Measure acceleration during a collision
• M...
Order code: ACC-BTA
Vernier Barometer
VERNIER BAROMETER
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or for experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable...
Order code: BAR-BTA
Vernier Thermocouple
VERNIER THERMOCOUPLE
The low cost and a wide temperature range makes the simple and rugged Vernier Thermocouple an economical, versatile temperature sensor.
The sensor uses type-K thermocouple wire to measure temperatures in the range of -200 to 1400˚C. It can be ...
Order code: TCA-BTA
Vernier Force Plate
VERNIER FORCE PLATE
About the size of a bathroom scale, the Vernier Force Plate has been designed for much higher forces than their DFS-BTA Dual-Range Force Sensor. The Force Plate can measure the forces developed during stepping, jumping and other human-scale actions.
...
Order code: FP-BTA
Vernier Blood Pressure Sensor
VERNIER BLOOD PRESSURE SENSOR
Vernier's Blood Pressure Sensor is a non-invasive sensor designed to measure human blood pressure. It can be used to measure systolic and diastolic blood pressure utilising the oscillometric technique. The sensor includes a standard adult siz...
Order code: BPS-BTA
Vernier Charge Sensor
VERNIER CHARGE SENSOR
The Vernier Charge Sensor is used as an electronic electroscope. Unlike a traditional electroscope, the Charge Sensor can make quantitative measurements. Numerical measurements improve many electrostatics experiments such as charging by induction, ch...
Order code: CRG-BTA
Vernier Instrumentation Amplifier
VERNIER INSTRUMENTATION AMPLIFIER
Vernier's Instrumentation Amplifier can be used to connect a wide variety of measurement equipment to a Vernier interface and electronically collect, store and analyze the data.
The Instrumentation Amplifier monitors voltages from 20mV...
Order code: INA-BTA
Vernier Ammonium Ion-Selective Electrode
VERNIER AMMONIUM ION-SELECTIVE ELECTRODE
Vernier's Ammonium Ion-Selective Electrode (ISE) can be used to measure the concentration of ammonium (NH4+) in aqueous samples.
Use the Vernier Ammonium ISE to measure levels of ammonium ions introduced from fertilizers. It can...
Order code: NH4-BTA
Vernier Calcium Ion-Selective Electrode
VERNIER CALCIUM ION-SELECTIVE ELECTRODE
Vernier's Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of Calcium (Ca2+) in aqueous samples.
Data from the Vernier Calcium ISE can give a good indication of hardness of water (as Ca2+). The conce...
Order code: CA-BTA
Vernier Chloride Ion-Selective Electrode
VERNIER CHLORIDE ION-SELECTIVE ELECTRODE
Vernier's Chloride Ion-Selective Electrode (ISE) is used to measure the concentration of chloride (Cl-) in aqueous samples.
The concentration of the chloride ion gives a quick measurement of salinity of water samples. Use the Ve...
Order code: CL-BTA
Vernier Nitrate Ion-Selective Electrode
VERNIER NITRATE ION-SELECTIVE ELECTRODE
Vernier's Nitrate Ion-Selective Electrode (ISE) can be used to measure the concentration of Nitrate (NO3-) in aqueous samples.
Nitrate concentration, which can be increased by acidic rainfall, fertilizer runoff from fields and pl...
Order code: NO3-BTA
Vernier Potassium Ion-Selective Electrode
VERNIER POTASSIUM ION-SELECTIVE ELECTRODE
The Vernier Potassium Ion-Selective Electrode can be used to measure the concentration of potassium (K+) ions in aqueous solutions.
The Vernier Potassium Ion-Selective Electrode makes the measurement of potassium ions portable....
Order code: K-BTA
Vernier ORP Sensor
VERNIER ORP SENSOR
The Vernier ORP sensor measures the ability of a solution to act as an oxidising agent or reducing agent. ORP stands for oxidation-reduction potential. ORP electrodes are often used to measure the oxidising ability of chlorine in swimming pools or to de...
Order code: ORP-BTA
Vernier Relative Humidity Sensor
VERNIER RELATIVE HUMIDITY SENSOR
Vernier's Relative Humidity Sensor contains an integrated circuit that can be used to monitor relative humidity
over the range 0 to 95% (± 5%). The sensor has applications in weather studies, monitoring greenhouses
or for determining d...
Order code: RH-BTA
Vernier Extra Long Temperature Probe
VERNIER EXTRA LONG TEMPERATURE PROBE
This extra long temperature probe has a 30 metre cable and is designed for remote, outdoor temperature sensing or for measuring temperature at various depths in lakes and streams.
Requirements:
This sensor requires suitable ...
Order code: TPL-BTA
Vernier Wide Range Temperature Probe
VERNIER WIDE RANGE TEMPERATURE PROBE
Vernier's rugged Wide-Range Temperature Probe measures a wide temperature range from –20 to 330°C. The high upper limit of the sensor allows melting point determinations of most organic compounds. It uses Resistance Temperature Detecti...
Order code: WRT-BTA
Vernier Flow Rate Sensor
VERNIER FLOW RATE SENSOR
Vernier's Flow Rate Sensor allows students to easily measure the velocity of water when studying the discharge, flow patterns and sediment transport of a creek or river.
The Flow Rate Sensor includes 3 riser rods which enable the impeller to b...
Order code: FLO-BTA
Vernier Tris-Compatible Flat pH Electrode Only
VERNIER TRIS-COMPATIBLE FLAT PH ELECTRODE ONLY
This is an electrode only and connects via BNC to one of Vernier's Electrode Amplifiers to function as a pH sensor.
It is not compatible with the Vernier PH-BTA pH Sensor
Combined with the EA-BTA Electrode Amplifier it b...
Order code: FPH-BNC
Vernier Constant Current Sensor
VERNIER CONSTANT CURRENT SYSTEM
The Vernier Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments. It is capable of delivering up to 0.6A at 5V DC and eliminates the need for a separate power supply whe...
Order code: CCS-BTA
Vernier Platinum-Cell Conductivity Probe
VERNIER PLATINUM-CELL CONDUCTIVITY PROBE
The Vernier Platinum-Cell Conductivity Probe allows students to explore the dependence of conductivity on temperature with the option of aqueous temperature compensation (2%) or no temperature compensation. The 2-cell platinum sens...
Order code: CONPT-BTA
Vernier Melt Station
VERNIER MELT STATION
Vernier's Melt Station connects to a Vernier interface to accurately determine the melting temperature of solid substances.
Features:
• Accurate results using built-in RTD over a range of 30°C to 260°C
• High-quality 6X viewing lens for cl...
Order code: MLT-BTA
Vernier PAR Sensor
VERNIER PAR SENSOR
Vernier's PAR (Photosynthetically Active Radiation) Sensor measures photosynthetic light levels in both air and water.
The sensor reports the Photosynthetic Photon Flux Density (PPFD) which corresponds to micromoles of photons per meter squared per se...
Order code: PAR-BTA
Vernier Pressure Sensor 400
VERNIER PRESSURE SENSOR 400
The Vernier Pressure Sensor 400 is the optimal sensor for conducting physical and analytical chemistry experiments such as approximating the adiabatic expansion of a gas, Charles’ law experiments and ideal gas law investigations. It measures ab...
Order code: PS400-BTA
Vernier Sound Level Sensor
VERNIER SOUND LEVEL SENSOR
The Vernier Sound Level Sensor allows you to easily measure sound level in decibels (dB) in a variety of school settings. Simply connect and collect. No background knowledge of sound-level weighting, response times or the decibel scale is needed...
Order code: SLS-BTA
Vernier Energy Sensor
VERNIER ENERGY SENSOR
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits.
Setting up a circuit to study renewable energy systems su...
Order code: VES-BTA
51 low relevance results shown for 'GO-LINK'. | View 25 per page