22 results found for 'Bare'. | View 100 per page
Low relevance matches: 3 other results may be of interest to you. Show low relevance matches
22 results found for 'Bare'. | View 100 per page
Low relevance matches: 3 other results may be of interest to you. Show low relevance matches
IEC Geiger Tube Only Bare MX168 or ZP1481
IEC BARE MX168/ZP1481 GEIGER TUBE ONLY
A replacement bare normal MX168 or ZP1481 IEC Geiger Tube.
This tube is used in all models of IEC Geiger Counters for alpha, beta and gamma detection.
NOTE: IEC must fit and test all GM tubes for warranty. If the tube only is...
Order code: PA1885-020
IEC Optical Bench Rail 1.2m Long Aluminium Bare
IEC OPTICAL BENCH 1.2M BARE ALUMINIUM RAIL
Bare aluminium rail 1.2m long with end caps for the HL2240-001 IEC Optical Bench
but without the 1m long metric scale and components.
Order code: PA2240-220
IEC Wire Copper Bare 14 SWG 2.0mm 50g Reel
IEC BARE COPPER WIRE 14SWG, 2.00mmD, 50g Reel
A 50g reel of 14 standard wire gauge bare copper wire that has a diameter of 2.00mm and is approximately 1.7m long.
Order code: PA4769-001
IEC Wire Copper Bare 16 SWG 1.62mm 50g Reel
IEC BARE COPPER WIRE 16SWG, 1.62mmD, 50g Reel
A 50g reel of 16 standard wire gauge bare copper wire that has a diameter of 1.62mm and is approximately 2.7m long.
Order code: PA4770-001
IEC Wire Copper Bare 18 SWG 1.22mm 50g Reel
IEC BARE COPPER WIRE 18SWG, 1.22mmD, 50g Reel
A 50g reel of 18 standard wire gauge bare copper wire that has a diameter of 1.22mm and is approximately 4.7m long.
Order code: PA4771-001
IEC Wire Copper Bare 20 SWG 0.91mm 50g Reel
IEC BARE COPPER WIRE 20SWG, 0.91mmD, 50g Reel
A 50g reel of 20 standard wire gauge bare copper wire that has a diameter of 0.91mm and is approximately 8.5m long.
Order code: PA4772-001
IEC Wire Copper Bare 22 SWG 0.71mm 50g Reel
IEC BARE COPPER WIRE 22SWG, 0.71mmD, 50g Reel
A 50g reel of 22 standard wire gauge bare copper wire that has a diameter of 0.71mm and is approximately 14.1m long.
Order code: PA4773-001
IEC Wire Copper Bare 24 SWG 0.56mm 50g Reel
IEC BARE COPPER WIRE 24SWG, 0.56mmD, 50g Reel
A 50g reel of 24 standard wire gauge bare copper wire that has a diameter of 0.56mm and is approximately 22.7m long.
Order code: PA4774-001
IEC Wire Copper Bare 26 SWG 0.46mm 50g Reel
IEC BARE COPPER WIRE 26SWG, 0.46mmD, 50g Reel
A 50g reel of 26 standard wire gauge bare copper wire that has a diameter of 0.46mm and is approximately 34m long.
Order code: PA4775-001
IEC Wire Copper Bare 28 SWG 0.38mm 50g Reel
IEC BARE COPPER WIRE 28SWG, 0.38mmD, 50g Reel
A 50g reel of 28 standard wire gauge bare copper wire that has a diameter of 0.38mm and is approximately 50m long.
Order code: PA4776-001
IEC Wire Copper Bare 30 SWG 0.31mm 50g Reel
IEC BARE COPPER WIRE 30SWG, 0.31mmD, 50g Reel
A 50g reel of 30 standard wire gauge bare copper wire that has a diameter of 0.31mm and is approximately 71m long.
Order code: PA4777-001
LED Red with 200mm Cables Pack of 10
Red LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
1.8 to 2.2V @ 20mA
Sold a...
Order code: SC33001
LED Green with 200mm Cables Pack of 10
Green LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
3.0 to 3.4V @ 20mA
Sold...
Order code: SC33002
LED Blue with 200mm Cables Pack of 10
Blue LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
3.0 to 3.4V @ 20mA
Sold ...
Order code: SC33003
LED Clear Body turns Red with 200mm Cables Pack of 5
A 'water clear' bodied LED that turns red when voltage is applied.
The benefit of the clear body is that when measuring the photon wavelength using a spectrometer or by a diffraction method then the wavelength is not filtered by a coloured case and so a pure wavelength can be ...
Order code: SC33006C
LED Clear Body turns Green with 200mm Cables Pack of 5
A 'water clear' bodied LED that turns green when voltage is applied.
The benefit of the clear body is that when measuring the photon wavelength using a spectrometer or by a diffraction method then the wavelength is not filtered by a coloured case and so a pure wavelength can ...
Order code: SC33007C
LED Clear Body turns Blue with 200mm Cables Pack of 5
A 'water clear' bodied LED that turns blue when voltage is applied.
The benefit of the clear body is that when measuring the photon wavelength using a spectrometer or by a diffraction method then the wavelength is not filtered by a coloured case and so a pure wavelength can be...
Order code: SC33008C
Vernier Analogue BTA Cable
VERNIER ANALOGUE BTA CABLE
This 1.5m cable can be used to connect your homemade analogue sensors to Vernier interfaces. There is a BTA plug on one end and six bare wires on the other end.
You will need to use a multimeter and test for continuity to determine which wir...
Order code: CB-BTA
Vernier Digital BTD Cable
VERNIER DIGITAL BTD CABLE
This 1m cable can be used to connect your homemade digital sensors to Vernier interfaces. There is a BTD plug on one end and six bare wires on the other end.
You will need to use a multimeter and test for continuity to determine which wire go...
Order code: CB-BTD
Scientrific Remagnetiser
Designed, manufactured by and only available from Scientrific. The remagnetiser has a 'Super' neodymium iron boron magnet encased in a heavy duty plastic handle which overcomes the problems of chipping and magnet separation when using a bare super magnet.
With directions to ea...
Order code: SC1008
IEC Electric Motor Kit Hodson Rubber Ring
IEC HODSON MOTOR KIT RUBBER RING
A replacement rubber ring for forming the commutator for the EM2193-201 IEC Hodson Motor Kit.
The rings hold the bare ends of the rotor winding tightly to the central boss to form the commutator.
Order code: PA2193-230
Buzzer Piezo Siren Dustproof and Waterproof
A dustproof and waterproof 7.5-15V DC piezo buzzer, 85x42mm, with ear deafening 100dB output at 1 metre. Has a screw down mounting and connects via bare ended leads.
If you are sick of trying to get cheap, little electric bells working (we think that they are so bad that we won'...
Order code: SC5800
22 results found for 'Bare'. | View 100 per page