DIGITAL STORAGE OSCILLOSCOPE.
This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). The 7” 24-bit true colour TFT display offers a crisp display of both waveforms. The screen can be set up to simultaneously display the waveform plus indicate the measured wave voltage, peak to peak plus RMS, frequency, duty cycle etc. Using the USB lead and software supplied you are able to make realtime adjustments of the scope via a computer. Any stored data or settings can be either saved to a USB stick or downloaded direct to a PC. There is a comprehensive onboard help menu for ease of use. Being digital the overall size & weight is about 75% less than traditional CRT oscilloscopes.

The User Manual needs to be downloaded, see Documents tab at base of page.

Software is supplied on a mini CD which will require a suitable CD/DVD player.

Accessories include:
• 2 x 10:1 probes - 1m length
• 1 x BNC-BNC lead
• 1 x USB cable
• 1 x Power lead

Features:
• 2 Channel Digital Oscilloscope
• Function Waveform Generator + Synchronising Signal + External Trigger
• Easy to use button layout
• Large and clear 7” true colour 24-bit display
• Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
• Huge selection of auto measurement functions
• Powerful trigger functions:
     Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
• Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS
• Arbitrary wave types: square, sine, triangle, trapezoidal, pulse, DC
• Integrated USB host, support USB disk storage, USB interface system update

Specifications*:

Basics:
• Bandwidth: 150MHz
• Oscilloscope Channels: 2CH
• Waveform Generator: 1CH
• Sample Rate: 1GSa/s (single channel) 500MSa/s (two channels)

Measurement:
• Cursor
• Voltage difference between cursors ΔV
• Time difference between cursors ΔT
• Reciprocal of ΔT, in Hertz (1/ΔT)

Auto Measurement: frequency, period, mean, peak-to-peak, RMS, minimum, maximum, rising time, falling time, + width, - width, base, top, middle, amplitude, overshoot, pre-shoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF.

General:
• Interface: Standard interface USB Host, USB Device, Probe compensator output
• Output Voltage (typical): about 2Vpp input ≥1MΩ load
• Frequency (typical): 1kHz
• Power Supply: 240V AC
• Power Consumption: <30W
• Fuse: T 3.15A, 250V, 5x20mm
• Operating Temperature: 0 to 50°C
• Storage Temperature: -40 to +71 °C
• Humidity: ≤+40°C ≤90% relative humidity, +41°C ~50°C ≤60% relative humidity.

Digital Voltmeter:
• Data Source: CH1, CH2
• Measurement Type: DC RMS, AC RMS, DC
• Frequency Meter: hardware 6 bits frequency meter


Arbitrary Waveform Generator:
• Channel: 1
• Sample Rate: 200MSa/s
• Vertical Resolution: 12 bits
• Maximum Frequency: 25 MHz
• Standard Waveforms: sine, square, ramp, Exp, noise, DC
• Arbitrary Waveform: Arb1, Arb2, Arb3, Arb4
• Sine Frequency Range: 0.1Hz-25MHz
• Square/pulse Frequency range: 0.1Hz-10MHz
• Triangular Wave Frequency Range: 0.1Hz-1MHz
• Sampling Wave Frequency Range: 0.1Hz-1MHz
• Index Frequency Range: 0.1Hz-5MHz
• Noise Frequency Range: 0.1 Hz to 10 MHz
• Waveform Length: 4KSa
• Frequency Accuracy: 100 ppm (<10 kHz) 50 ppm (>10 kHz)
• Frequency Resolution: 0.1 Hz or 4 bits, take the greater one
• Amplitude Output Range 10mV to 7Vp-p (high impedance), 5mV to 3.5Vp-p (50Ω)
• DC Offset Range: ±3.5 V, high impedance, ±1.75 V, 50 Ω
• Resolution: 100 μV or 3 bits, take the greater one
• Accuracy: 2% (1 kHz)
• Output Impedance: 50 Ω

Display:
• Type: 7"" diagonal TFT liquid crystal
• Resolution: 800 (horizontal) * 480 (vertical) pixels
• Display Colour: 16 million colours (24 bits true colour)
• Persistence Time: minimum, 1s, 5s, 10s, 30s, infinite
• Display Type: dot, vector
• Display Brightness: adjustable
• Grid Type: adjustable
• Grid Brightness: adjustable

Acquistion:
• Normal: Sample data
• Peak-to-Peak Value: Display high frequency and random burr
• Average Waveform Times: 4, 8, 16, 32, 64, 128
• High Resolution: Up to 12bit

Input:
• Input Coupling: DC, AC, GND
• Input Impedance: 1MΩ±2% 20pF±3pF
• Probe Attenuation Factor: 1X, 10X, 100X, 1000X
• Voltage Rating: 300V CAT II
• Maximum Input Voltage: 300V RMS (10X)

Horizontal:
• Waveform Interpolation: (sin x)/x
• Maximum Record Length:
• Single Channel Maximum 8M
• Two channels Maximum: 4M
• Horizontal Scale Range: 2ns/div~100s/div 1, 2, 5 step by step
• Time Base Mode: Y-T, X-Y, Roll
• Zero Offset: ±0.5 divΧminimum time base gear
• Sample Rate and Delay Time Accuracy: ±25ppm
• Delta Time Measurement Accuracy (Full Bandwidth) Sample Rate and Delay Time Accuracy: single-shot, Normal mode ± 1 sample interval+100ppmΧreading+0.6ns) 16 times averages ± (1 sample interval+100ppmΧreading+0.4ns)
• Sample Interval: =sec/divχ200
• Sample Rate and Delay Time Accuracy: ±50ppm (at any interval greater than 1ms)

Vertical:
• Bandwidth: 100MHz
• Rising Time in BNC Position (typical): 2.4ns, 3.5ns, 2.4ns, 3.5ns
• Vertical Resolution: 8 bits resolution, each channel samples simultaneously
• Vertical Sensitivity: 2mV/div to 10V/div
• Offset Range ≥ 200mV/div, ±1V; 200mV/div ±50V
• Mathematical Operation: +, -, Χ, χ, FFT
• FFT Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
• Bandwidth Limit: 20MHz
• Bass Response (-3db): In BNC position ≤ 10Hz

Vertical gain accuracy In ‘’normal’’ or ‘’average’’ acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
In ‘’normal’’ or ‘’average’’ acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%
Note: Bandwidth reduced to 6MHz when using a 1X probe.

Trigger:
• Trigger Type: Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
• Trigger Level Range: ±5 divisions from the centre of the screen
• Trigger Mode: Auto, Normal, single
• Level CH1- CH2: ±4 divisions from the centre of the screen
• Hold-Off Range: 8ns~10s
• Trigger Level Accuracy: CH1-CH2 0.2 divΧvolts/div within ±4 divisions from the centre of the screen

Edge Trigger
• Slope: Rising edge, falling edge, rising or falling edge
• Signal Source: CH1, CH2, EXT(Only With AWG Model)

Pulse Width Trigger
• Polarity: Positive polarity, negative polarity
• Condition (When): <, >, !=, =
• Signal Source: CH1-CH2,
• Pulse Width Range: 8ns ~ 10s
• Accuracy: 8ns

Video Trigger
• Signal Standard: NTSC, PAL
• Signal Source: CH1-CH2
• Synchronisation: Scanning line, line number, odd field, even field, all field

Slope Trigger
• Slope: rising, falling
• Condition (When): <, >, !=, =
• Signal Source: CH1-CH2
• Time Range: 8ns - 10s
• Accuracy: 8ns

Overtime Trigger
• Signal Source: CH1-CH2
• Polarity: Positive polarity, negative polarity
• Time Range: 8ns - 10s
• Accuracy: 8ns

Window Trigger
• Signal Source: CH1-CH2

• Pattern Trigger
• Pattern 0: low level; 1: high level; X: ignore
• Level (signal source): CH1- CH2

Interval Trigger
• Slope: rising, falling
• Condition (When): <, >, !=, =
• Signal Source: CH1-CH2
• Time Range: 8ns - 10s
• Accuracy: 8ns

Under Amp Trigger
• Polarity: Positive polarity, negative polarity
• Condition (When): <, >, !=, =
• Signal Source: CH1-CH2
• Time Range: 8ns - 10s
• Accuracy: 8ns

UART Trigger
• Condition (When): Start, Stop, data, Parity ERR, COM ERR
• Signal Source (RX/TX): CH1-CH2
• Data Format: Hex (hexadecimal)
• Data Length: 1 byte
• Data Bit Width: 5 bit, 6 bit, 7 bit, 8 bit
• Odd-Even Check: none, odd, even
• Idle Level: high, low
• Baud Rate (optional): 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
• Baud Rate (user-defined): 300bit/s~334000bit/s

LIN trigger
• Condition (When): Interval field, synchronisation field, ID field, synchronisation error, identifier, ID and data
• Signal Source: CH1-CH2
• Data Format Hex: (hexadecimal)
• Baud Rate (optional): 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
• Baud Rate (user-defined): 300bit/s~334000bit/s

CAN Trigger
• Condition (When): Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame
• Signal Source: CH1-CH2
• Data Format: Hex (hexadecimal)
• Baud Rate (optional): 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
• Baud Rate (user-defined): 5kbit/s~1Mbit/s

SPI Trigger Signal Source: CH1-CH2
• Data Format: Hex (hexadecimal)
• Data Bit Width: 4, 8, 16, 24, 32

IIC Trigger
• Signal Source: (SDA/SCL) CH1-CH2
• Data Format: Hex (hexadecimal)
• Data Index: 0-7
• When (condition): Start bit, stop bit, No Ack, address, restart, address and data

*Specifications are subject to change without notice.

• Warranty: 1 year

  ---

  Dimensions
  • Product size: (HxWxD): 150x110x150mm
  • Weight: 1.9kg
  • Packed weight: 3.1kg

    Last edited 28th May 2024

    Accessories / Spare Parts:	From
    428-4227 - Alligator Clips to Oscilloscope (BNC) Cable	$8.00
    SC5072 - Adaptor BNC Male Plug to Two 4mm Banana Sockets	$7.00
    SC5073 - Adaptor BNC Plug to RCA Socket	$3.00
    SC5060 - Lead 3.5mm stereo plug to two RCA or BNC plugs	$11.00
    Similar Products:	From
    LB2122-001 - IEC Digital Ammeter 20A DC	$108.00
    SC2286 - Handheld Oscilloscope and Digital Multimeter	$387.00
    SC2254 - Digital Multimeter 19 Ranges Transistor Diode Tester	$16.40
    GDX-CUR - Vernier Go Direct Current Probe	$238.00
    GDX-NRG - Vernier Go Direct Energy Sensor	$236.00
    GDX-VOLT - Vernier Go Direct Voltage Probe	$214.00
    DCP-BTA - Vernier Current Probe	$118.00
    HCS-BTA - Vernier High Current Sensor	$214.00
    SC5039 - Environment Meter and Multimeter with Volts Current Resistance Capacitance Frequency dB Temp Humidity Lux	$133.00
    SC5000 - Multimeter Digital Low Cost	$11.80
    LB2122-010 - IEC Digital Ammeter 2A DC	$108.00
    LB2123-001 - IEC Digital Volt Meter 20V DC	$108.00
    LB2123-010 - IEC Digital Volt Meter 2V DC	$108.00
    LB2123-200 - IEC Digital Volt Meter 200V DC	$108.00
    PA1764-220 - IEC Electricity Kit Multimeter AC DC with Capacitance	$39.60
    SC2252 - Digital Multimeter 19 Ranges Transistor Diode Tester	$10.50
    SC2266 - Auto Ranging Digital Multimeter	$33.60

    Documents:
    Catalogue	May 2024 Web Catalogue
    User Manual	SC2288 Digital Storage Oscilloscope

    
    Note: Prices do NOT include GST or freight