IEC SODIUM LAMP AND POWER SUPPLY
This low cost IEC Power Supply and Sodium Lamp is a compact and self contained instrument that is an excellent sodium light source for conducting Atomic Absorption (AA) experiments with the CH3792-001 IEC Flame Emission Spectrometer. The sodium lamp can also be swapped for other spectral lamps (not included) for a variety of optical experiments.

HL3794-101 is the same Power Supply and Lamp Holder but WITHOUT a lamp.

A manually adjusted shutter is provided on the front of the chimney to block light from being emitted or to select one of the following four apertures:
• A long slot
• A large hole
• A 4.5mm hole
• A 2.5mm hole

Features:
• SAFE: Designed to proper engineering standards of electrical safety.
• COMPACT: The attractive unit takes very little space in the lab.
• PROTECTED: The tube is always protected from damage inside the ‘chimney’.
• EASY TO USE: Power is applied by a single illuminated rocker switch on the rear panel.
• Easy to change the aperture.
• This mains powered product was specially designed for safe classroom use.
• To ensure easy storage the mains cable is removable.
• Designed to be compatible with CH3792-001 IEC Flame & ‘AA’ Spectrometer, the height of the light apertures match the height of the Spectrometer’s viewing tube.

This power supply and lamp holder provides the special electrical characteristics required to also operate any of the following:
PA3797-101 Mercury lamp
PA3797-103 Neon lamp
PA3797-104 Helium lamp

Easily replace or swap between different types of spectral lamps:
Make sure that the lamp and housing is cool then remove the four finger screws from the top cap and slide the rear panel from the 'chimney'. While holding the lamp firmly, carefully move the lamp slightly from side to side and withdraw it from the socket. The replacement spectral lamp can then be easily plugged into the lamp socket and the housing re-assembled.

NOTE: This is a genuine IEC product.
We believe in supporting Australian industry and only sell genuine IEC products, we do NOT sell imported clones of IEC products.

• Warranty: 1 year

  ---

  Dimensions
  • Product size: (HxWxD): 275x171x130mm
  • Weight: 2kg

    Last edited 25th Apr 2024

    Works with:	From
    PA3797-102 - IEC Spectral Lamp Sodium	$160.00
    PA3797-101 - IEC Spectral Lamp Mercury	$160.00
    PA3797-103 - IEC Spectral Lamp Neon	$160.00
    PA3797-104 - IEC Spectral Lamp Helium	$160.00
    CH3792-001 - IEC Spectrometer Flame Emission with new software	$1,717.00
    Similar Products:	From
    HL3794-101 - IEC Spectral Lamp Mini Power Supply & Holder Combined without Lamp	$297.00

    Documents:
    Catalogue	May 2024 Web Catalogue
    User Manual	IEC Spectral Lamp Power Supply

    
    Note: Prices do NOT include GST or freight