49 results found for 'screw clamp'. |1|2 | Next | View 100 per page
Matching rule: Every word must match (produces better results) | Only one word must match (Produces more results)
Try removing a word: screw clamp
Low relevance matches: 187 other results may be of interest to you. Show low relevance matches
49 results found for 'screw clamp'. |1|2 | Next | View 100 per page
Matching rule: Every word must match (produces better results) | Only one word must match (Produces more results)
Try removing a word: screw clamp
Low relevance matches: 187 other results may be of interest to you. Show low relevance matches
IEC Horizontal Pulley 50mm Diameter with Clamp Screw
IEC HORIZONTAL BENCH MOUNTING PULLEY
A 50mm diameter high quality nylon pulley mounted on a strong aluminium frame for clamping to a bench top or similar flat surface to a maximum 25mm thickness. The side of the pulley clamps parallel to the surface of the bench. The clam...
Order code: MF2590-001
IEC Ripple Tank Clamp Screw for Leg with Wing Nut
IEC RIPPLE TANK CLAMP SCREW FOR LEG WITH WING NUT
A clamp screw with wing nut and cupped washer for the leg of the SW3430-001 IEC Ripple Tank.
The stainless steel legs are held to the moulded plastic frame by these aluminium clamp screws. The leg passes through the clam...
Order code: PA3430-010
IEC Ripple Tank Support Bar Clamp Collar & Screw
IEC RIPPLE TANK SUPPORT BAR CLAMP COLLAR AND SCREW
A replacement clamp collar and screw for the PA3430-006 stainless steel bar that supports the variable speed rippler of the SW3430-001 IEC Ripple Tank
Order code: PA3430-016
Boss Head - Die Cast Aluminium Alloy with Plastic Head Clamping Screws
Bosshead, die-cast aluminium, takes up to 19mm diameter rod.
Order code: SC7340
Boss Head - Die Cast Aluminium Alloy with Metal Head Clamping Screws
Die-cast aluminium bosshead, takes up to 24mm diameter rod.
Overall length with clamps fully extended: 180mm
Width: 40mm
Order code: SC7345
IEC Clamp Bench Alloy Universal for 13mm Maximum Rods
IEC UNIVERSAL BENCH CLAMP FOR UP TO 13mm RODS
The IEC designed alloy Universal Bench Clamp can fit to benches up to 40mm thick and, when clamped, can carry rods up to 13mm diameter both vertically and horizontally.
The clamp is complete with large steel knurled head kno...
Order code: LB0858-001
IEC Collision In 2 Dimensions Kit
IEC COLLISION IN 2 DIMENSIONS KIT
This simple device clamps to a bench and allows balls of different mass to collide at angles to calculate the laws of dynamics and mass. The point that the balls reach the floor is shown by carbon paper leaving a mark. A plumb bob from be...
Order code: MF1000-001
Nalgene Erlenmeyer Flask Screw Cap PC 500ml
This Nalgene branded transparent flask is made of polycarbonate with embossed graduations marked in millilitres and a polypropylene closure.
Features:
Far safer than glass flasks for use in shakers.
Closures are linerless, noncontaminating.
Flasks and closures are a...
Order code: 4108-0500
Bottle Reagent Clear Glass Graduated with Blue Screw Cap 1000ml
1000mL graduated glass multi-purpose reagent bottle with blue screw cap and plastic ring seal.
Order code: LW1071-01
IEC Alligator Clip 4mm Plain Shank and Screw
IEC ALLIGATOR CLIP 4mm PLAIN SHANK AND SCREW
A pack of 10 quality plain alligator clips with non-insulated shanks that fit a 4mm banana plug. Alternatively, wire can be soldered or connected via the screw terminal to the alligator clip.
Overall length 50mm.
Order code: PA0160-001
IEC Motor/Generator Spare Hand Wheel Centre and Screw
IEC MOTOR/GENERATOR SPARE HAND WHEEL CENTRE AND SCREW
A replacement spare hand wheel centre and screw for the EM1758-001 IEC Hand Cranked AC/DC Motor/Generator.
Order code: PA1758-008
IEC Induction Kit Socket 4mm with Screw and Lug
IEC HODSON INDUCTION KIT 4mm SOCKET WITH SCREW AND LUG
A brass piece complete with fixing screw and connection lug for making a 4mm banana socket in the coil formers of the EM1973-001 IEC Hodson Induction Kit.
The plastic formers can have insulated wire wound on them wit...
Order code: PA1973-046
Grub Screw to suit IEC Power Supply Knob - Pack of 10
IEC GRUB SCREW PACK 10
A pack of 10 IEC Grub Screws to secure the knobs of many IEC products such as Power Supplies.
Order code: PA1993-005
IEC Lamp Socket MES Plastic Base Screw Terminals
IEC LAMP SOCKET MES PLASTIC BASE SCREW TERMINALS
A Lamp Socket for any MES lamp (Miniature Edison Screw) with plastic base and 2 screw terminals for wires.
Order code: PA2030-002
49 results found for 'screw clamp'. |1|2 | Next | View 100 per page