777 low relevance results shown for 'Vernier Lab Books'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|32 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
777 low relevance results shown for 'Vernier Lab Books'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|32 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
Vernier ISE Nitrate Replacement Module
VERNIER ISE NITRATE REPLACEMENT MODULE
The Vernier Nitrate Ion-Selective Electrode Module replaces the electrode membrane. Simply unscrew the old one and screw on the new one.
The membrane of a Vernier Nitrate ISE electrode has a limited life span of one to two years,...
Order code: NO3-MOD
Vernier ISE Nitrate Low Standard
VERNIER ISE NITRATE LOW STANDARD SOLUTION
This 500 mL solution has a low concentration of 1mg/L and is for use with the Vernier Nitrate ISE, Vernier Go Direct Nitrate ISE and Vernier Nitrate ISE BNC
High quality, uncontaminated standards are critical for accurate calibra...
Order code: NO3-LST
Vernier ISE Nitrate High Standard
VERNIER ISE NITRATE HIGH STANDARD SOLUTION
This 500 mL solution has a high concentration of 100mg/L and is for use with the Vernier Nitrate ISE, Vernier Go Direct Nitrate ISE and Vernier Nitrate ISE BNC
High quality, uncontaminated standards are critical for accurate cal...
Order code: NO3-HST
LabQuest Padded Vinyl Carry Case
A padded, soft vinyl zippered case with carrying strap. It's ideal for storing and carrying the Vernier LabQuest data logger and USB cable. Approximate size: 205x115x50mm.
The case can also be used for storing and carrying sensors, e.g. a Temperature Sensor and Motion Detecto...
Order code: LQ-CASE
Vernier Easy Temp
VERNIER EASYTEMP
The Vernier EasyTemp is a rugged, general-purpose temperature sensor for TI graphing handhelds. It's mini-A USB connector allows the temperature probe to be attached directly to the USB port of a TI-84 Plus graphing calculator or TI-Nspire handheld. Conne...
Order code: EZ-TMP
Vernier Flow Rate Sensor
VERNIER FLOW RATE SENSOR
Vernier's Flow Rate Sensor allows students to easily measure the velocity of water when studying the discharge, flow patterns and sediment transport of a creek or river.
The Flow Rate Sensor includes 3 riser rods which enable the impeller to b...
Order code: FLO-BTA
Vernier pH Electrode BNC
VERNIER PH ELECTRODE
This is a replacement electrode only. It will NOT work without either EA-BTA Vernier Electrode Amplifier or the discontinued Vernier Go Wireless Electrode Amplifier
This Vernier gel-filled...
Order code: PH-BNC
Vernier Motion Detector Clamp
VERNIER MOTION DETECTOR CLAMP
The Motion Detector Clamp screws into the back of the Motion Detector and then it can be clamped to a variety of objects such as table tops, ring stands etc.
Order code: MD-CLAMP
Vernier ORP Replacement Electrode
VERNIER ORP REPLACEMENT ELECTRODE
A replacement electrode for use with the ORP Sensor, the GW-EA Go!Wireless Electrode Amplifier and the EA-BTA Electrode Amplifier.
The Vernier ORP sensor measures the ability of a solution to act as an oxidising agent or reducing agen...
Order code: ORP-BNC
Vernier pH Storage Bottles (Pack of 5)
VERNIER PH STORAGE BOTTLES
These are the same bottles in which the pH Sensors are shipped. Use them to make mini-beakers for our microscale titrations or to simply replace the storage bottle.
Order code: BTL
Vernier pH Storage Solution
VERNIER PH STORAGE SOLUTION
This is a 500 mL bottle of the pH Storage Solution. Use it as needed to replace spilled or contaminated solution.
Order code: PH-SS
Vernier Accessory Kit
VERNIER DYNAMICS SYSTEM ACCESSORY KIT
The Vernier Dynamics System Accessory Kit consists of two small and one large t-nut fasteners. The t-nuts are used to attach accessories such as a Dual Range Force Sensor or the Low-g Accelerometer to the discontinued Vernier Dynamics...
Order code: ACC-VDS
Vernier Bumper and Launcher Kit
VERNIER BUMPER AND LAUNCHER KIT
The Bumper and Launcher Kit contains accessories for experiments involving the Vernier Dual-Range Force Sensor, Vernier Wireless Dynamics System and the Vernier Dynamics Cart and Track System. The accessories include two hoop springs of dif...
Order code: BLK
Vernier Friction Accessory
VERNIER FRICTION ACCESSORY
A friction pad to fit Vernier's metal Dynamics Carts in the discontinued VDS Vernier Dynamics System.
The friction pad enables the metal carts to move under a very consistent friction force and setting the friction amount is as simple as turnin...
Order code: PAD-VDS
Vernier Bar Tape
VERNIER BAR TAPE
This Bar Tape is a flexible strip 3 meters long and 1.6 cm wide with opaque bars spaced every 1.525 cm. This strip can be attached to a dynamics cart and pulled through a photogate, taking the place of a "ticker tape" in many mechanics labs.
Order code: TAPE
Vernier Cart Picket Fence
VERNIER CART PICKET FENCE
The Vernier Cart Picket Fence consists of a piece of plastic with alternating clear and black stripes which can be used to interrupt the light beam in photogates.
It can be easily fitted to a Vernier Dynamics Cart, Collision Trolley, Air Track...
Order code: PF-CART
Vernier Rod Clamp
VERNIER ROD CLAMP
The Vernier Rod Clamp is used to attach one end of a Vernier Dynamics Track to a vertical ring stand rod. This configuration is most often used to create a ramp.
Order code: RC-VDS
Vernier Adjustable End Stop
VERNIER ADJUSTABLE END STOP
Attaches to the end of the Vernier Dynamics Track to prevent the cart from leaving the track.
The Vernier Adujustable End Stop is included with
Vernier Dynamics Cart and Track System
Vernier Dynamics Cart and Track System with Mo...
Order code: AS-VDS
Vernier Ultra Pulley
VERNIER ULTRA PULLEY
Add a Vernier Ultra Pulley to your Vernier Photogate or Vernier Go Direct Photogate to monitor motion as a string passes over the pulley or as the pulley rolls along a table.
You can also connect the Vernier Ultra Pulley to Vernier's Track with the...
Order code: SPA
Vernier Pulley Bracket
VERNIER PULLEY BRACKET
The Vernier Pulley Bracket attaches a Vernier Ultra Pulley to the Vernier Track that is included in the range of Vernier Dynamics Cart and Trac...
Order code: B-SPA
Vernier Imaging Hood
Discontinued - only 1 in stock
VERNIER IMAGING HOOD
The Imaging Hood enhances the image quality of gels being observed by eliminating most ambient light and reflections. Used as part of the Blue Digital Bioimaging System, the Imaging Hood is placed over the stand and BlueView Transilluminator when phot...
Order code: HOOD
Vernier Photogate Bracket
VERNIER PHOTOGATE BRACKET
This bracket attaches a Vernier or Pasco photogate to the Vernier Dynamics Track.
Order code: PGB-VDS
Vernier Photogate Bar Tape Kit
VERNIER PHOTOGATE BAR TAPE
The Photogate Bar Tape Kit contains a flexible plastic tape called "Bar Tape" and a guide that allows the tape to be used with a Vernier Photogate. The tape is 3 m long, and it has alternating opaque and transparent bars that have a spacing of 1...
Order code: TAPE-VPG
Vernier LabPro / WDSS / DCU / Stir Power Supply
VERNIER LABPRO, WIRELESS DYNAMIC SENSOR SYSTEMS,DIGITAL CONTROL UNIT AND STIR STATION POWER SUPPLY
This 6 volt, DC, centre tip negative, 600 mA mains adapter (plugpack) is used with the Vernier:
LabPro
Wireless Dynamics Sensor System
Digital Control Unit,
Stir Statio...
Order code: PSLP-INT
Vernier Air Track Adaptor
VERNIER AIR TRACK ADAPTER
The Vernier Air Track Adapter allows the Vernier Dual-Range Force Sensor or Vernier Go Direct Force and Acceleration Sensor to be mounted on the end of an air track for collision studies.
The adapter is compatible with most air tracks distrib...
Order code: ATA-DFS
777 low relevance results shown for 'Vernier Lab Books'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|32 | Next | View 100 per page