282 results found for 'Spare'. Prev |1|2|3|4|5|6|7|8|9|10|11|12 | Next | View 100 per page
Low relevance matches: 63 other results may be of interest to you. Show low relevance matches
282 results found for 'Spare'. Prev |1|2|3|4|5|6|7|8|9|10|11|12 | Next | View 100 per page
Low relevance matches: 63 other results may be of interest to you. Show low relevance matches
IEC Ripple Tank Instruction Book
IEC RIPPLE TANK INSTRUCTION BOOK
The instruction book for the SW3430-001 IEC Ripple Tank.
Order code: PA3430-007
IEC Ripple Tank Ripple Maker Adjustable Phase 12V Variable
IEC RIPPLE TANK RIPPLE MAKER ADJUSTABLE PHASE 12V VARIABLE
A complete gear driven, adjustable phase, adjustable speed Ripple Generator with integral speed control for the SW3430-001 IEC Ripple Tank.
Powered from any AC or DC power source up to 12V.
Clamps to the stain...
Order code: PA3430-008
IEC Ripple Tank Wave Generator Cams Pair
IEC RIPPLE TANK WAVE GENERATOR CAMS PAIR
A pair of phase adjustable Ripple Generator cams for the SW3430-001 IEC Ripple Tank.
These cams are a tight fit on the Ripple Generator shafts but can be twisted relative to one another to change the phase of the up/down motion o...
Order code: PA3430-009
IEC Ripple Tank Clamp Screw for Leg with Wing Nut
IEC RIPPLE TANK CLAMP SCREW FOR LEG WITH WING NUT
A clamp screw with wing nut and cupped washer for the leg of the SW3430-001 IEC Ripple Tank.
The stainless steel legs are held to the moulded plastic frame by these aluminium clamp screws. The leg passes through the clam...
Order code: PA3430-010
IEC Ripple Tank Illuminator only Hangs from Frame
IEC RIPPLE TANK ILLUMINATOR ONLY
An illuminator only for the SW3430-001 IEC Ripple Tank. The illuminator hangs by its electrical cable from a stainless steel support frame (PA3430-015 not included). The housing with 12V 25W QI reflector lamp throws light down through the ...
Order code: PA3430-013
IEC Ripple Tank Wave Generator Rippler Pair/Points
IEC RIPPLE TANK WAVE GENERATOR RIPPLER PAIR/POINTS
A set of 4 small, ball end, black nylon point source ripplers for the SW3430-001 IEC Ripple Tank that can be clicked at various points along the straight rail or clicked to the corners of the PA3430-008 variable phase, va...
Order code: PA3430-014
IEC Ripple Tank Support Bar for Illuminator
IEC RIPPLE TANK STAINLESS STEEL SUPPORT BAR FOR ILLUMINATOR
A stainless steel bar to support the PA3430-013 illuminator (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-015
IEC Ripple Tank Support Bar Clamp Collar & Screw
IEC RIPPLE TANK SUPPORT BAR CLAMP COLLAR AND SCREW
A replacement clamp collar and screw for the PA3430-006 stainless steel bar that supports the variable speed rippler of the SW3430-001 IEC Ripple Tank
Order code: PA3430-016
IEC Transformer for LB2633-001 Power Supply
IEC TRANSFORMER LOW VOLTAGE FOR LB2633-001 POWER SUPPLY
A replacement 240V to 2, 4, 6, 8, 10, 12V AC at 6A transformer only for the LB2633-001 IEC Power Supply.
NOTE: This transformer is also compatible with several other IEC Power Supplies. Please contact us for more...
Order code: PA4093-001
IEC Transformer for LB3758-001 Trimode
IEC TRANSFORMER FOR LB3758-001 TRIMODE POWER SUPPLY
A replacement transformer only for the LB3758-001 IEC Tri-Mode Signal Generator. Powers the power supply, the signal generator and the audio amplifier.
Order code: PA4093-101
IEC Transformer for LB2615-001 EHV Power Supply
IEC TRANSFORMER FOR LB2615-001 EHV POWER SUPPLY
A replacement transformer only for the high profile old model LB2615-001 EHV (0-5,000V DC) Power Supply.
NOTE: This transformer is for the OLD model instrument. It has a normal shape and is foot mounted. The later model wit...
Order code: PA4093-401
IEC Transformer EHV Power Supply LB2615-001 New Low Profile
IEC TRANSFORMER FOR LB2615-001 EHV POWER SUPPLY
A replacement transformer only for the low profile newer model LB2615-001 EHV (0-6,000V DC) Power Supply.
NOTE: This transformer is for the later model instrument with the sloping front panel. It is a low profile transforme...
Order code: PA4093-402
IEC Transformer for LB2643-001 Power Supply
IEC TRANSFORMER FOR LB2643-001 DUAL MODE POWER SUPPLY
A replacement 240V to 2, 4, 6, 8, 10, 12V at 8amps (plus other windings) transformer only for the LB2643-001 IEC Dual Mode Power Supply.
Order code: PA4094-001
IEC Transformer VAR 0-240V AC 0.75A
IEC TRANSFORMER VARIABLE 0-240V AC AT 0.75A
A replacement variable transformer only with output from zero to maximum volts at 0.75 Amps. Used on several larger type IEC power supplies.
Order code: PA4095-001
IEC Chladni Plates and Violin Bow and Sand
IEC CHLADNI PLATES WITH VIOLIN BOW AND SAND
Chladni's plates are an interesting way of demonstrating vibrations in flat plates. Fine sand is sprinkled onto the metal plate which is rigidly supported at its centre. Passing a violin bow across the edge of the plate sets the...
Order code: SW0855-001
Vernier Turbidity Bottles/Lids (Set of 6)
Box of six glass bottles with lids for use with Vernier's Turbidity Sensor. One bottle is included with each Turbidity Sensor but extra bottles can be very useful.
Order code: TRB-BOT
Molymod Short White Link for Compact Bonds
MOLYMOD SHORT WHITE LINKS
A pack of 25 white 2mm short links used for compact bonds.
Use the SLRT1 Short Link Remover Tool to easily extract these small plastic bonds when dismantling your Molymod® molecular models:
1. Lower the tool onto the link with t...
Order code: ML-10-25
Molymod Medium Purple Link
MOLYMOD MEDIUM PURPLE LINKS
A pack of 25 purple 19mm medium links for single bonds.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-11-25
Molymod Medium Grey Link
MOLYMOD MEDIUM GREY LINKS
A pack of 25 grey 19mm medium links for single bonds.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-12-25
Molymod Double/Triple Bonds Long Grey
MOLYMOD LONG GREY LINKS
A pack of 25 grey 30mm long flexible links for double or triple bonds.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-13-25
Molymod Double/Triple Bonds Long Purple
MOLYMOD LONG PURPLE LINKS
A pack of 25 purple 30mm long flexible links for double or triple bonds.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-14-25
Molymod Non Visible Links Neutral Plastic
MOLYMOD NON-VISIBLE LINKS
A pack of 25 short non-visible neutral plastic links.
Use the SLRT1 Short Link Remover Tool to easily extract these small plastic bonds when dismantling your Molymod® molecular models:
1. Lower the tool onto the link with the to...
Order code: ML-15-25
Molymod Medium White Link
MOLYMOD MEDIUM WHITE LINKS
A pack of 25 white 19mm medium links for single bonds.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-16-25
Molymod V-Link Grey for Tight Small Ring
MOLYMOD V-LINK GREY
A pack of 25 grey V-links used for tight small ring structures.
A quality, genuine Molymod® product fully compatible with all other genuine Molymod® products.
Order code: ML-20-25
Molymod Sulphur Yellow 4 Holes 23mm 109 Tetrahedral
23mm MOLYMOD SULPHUR ATOM 4 HOLES
A pack of 10 yellow Sulphur atoms 23mm diameter and with 4 holes angled at 109° tetrahedral.
A quality, genuine Molymod® atom fully compatible with other Molymod® products.
Order code: MA-403-10
282 results found for 'Spare'. Prev |1|2|3|4|5|6|7|8|9|10|11|12 | Next | View 100 per page