69 results found for 'Bar'. |1|2|3 | Next | View 100 per page
Low relevance matches: 62 other results may be of interest to you. Show low relevance matches
69 results found for 'Bar'. |1|2|3 | Next | View 100 per page
Low relevance matches: 62 other results may be of interest to you. Show low relevance matches
Vernier Barometer
VERNIER BAROMETER
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or for experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable...
Order code: BAR-BTA
Vernier Bar Tape
VERNIER BAR TAPE
This Bar Tape is a flexible strip 3 meters long and 1.6 cm wide with opaque bars spaced every 1.525 cm. This strip can be attached to a dynamics cart and pulled through a photogate, taking the place of a "ticker tape" in many mechanics labs.
Order code: TAPE
Vernier Photogate Bar Tape Kit
VERNIER PHOTOGATE BAR TAPE
The Photogate Bar Tape Kit contains a flexible plastic tape called "Bar Tape" and a guide that allows the tape to be used with a Vernier Photogate. The tape is 3 m long, and it has alternating opaque and transparent bars that have a spacing of 1...
Order code: TAPE-VPG
Vernier Bar Tape Guide
VERNIER BAR TAPE GUIDE
The Bar Tape Guide contains an adaptor that allows Bar Tape to be used with a Vernier Photogate. Bar Tape is 3 m long, and it has alternating opaque and transparent bars that have a spacing of 1.524 cm. The tape can be attached to objects and pulled...
Order code: TAPE-GUIDE
IEC Compound Bar Bonded 100x12.5mm with Handle
IEC COMPOUND BAR 100mm WITH HANDLE
A bimetal or compound bar 100 x 12.5mm made from two metals of different heat expansion coefficients bonded together face to face into a single strip of metal. The two metals are made obvious by their different colours - one coppery and ...
Order code: HL0883-001
IEC Iron Bar 150x10mm Diameter
IEC IRON BAR 150x10mm
A simple soft iron bar cut straight with flat ends and nickel plated to avoid corrosion. Useful for magnetic experiments and for creating electromagnets.
Also available is EM1971-001 IEC Iron Bar 150x12mm
Order code: EM1970-001
IEC Iron Bar 150x12.5mm Diameter
IEC IRON BAR 150x12mm
A simple soft iron bar cut straight with flat ends and nickel plated to avoid corrosion. Useful for magnetic experiments and for creating electromagnets.
Also available is EM1970-001 IEC Iron Bar 150x10mm
Order code: EM1971-001
IEC Bar and Gauge Brass with Insulating Handle
IEC BRASS BAR AND GAUGE SET
The classic brass bar and gauge apparatus to prove and demonstrate the effects of heating a metal. If the bar is heated or if the gauge is chilled in ice, the bar cannot fit the gauge both in length and in diameter.
The 83mm bar is provided...
Order code: HL0210-001
IEC Bar Breaker Cast Iron LP Gas
IEC CAST IRON BAR BREAKER FOR LP GAS
The classic cast iron Bar Breaker is a device that demonstrates the unstoppable forces of expansion and contraction. A steel bar lies in a cast iron frame and a cast iron pin locks the bar in place. A gas burner is fitted into the cast...
Order code: HL0231-001
IEC Bar Breaker Cast Iron Natural
IEC CAST IRON BAR BREAKER FOR NATURAL GAS
The classic cast iron Bar Breaker is a device that demonstrates the unstoppable forces of expansion and contraction. A steel bar lies in a cast iron frame and a cast iron pin locks the bar in place. A gas burner is fitted into the...
Order code: HL0232-001
IEC Compound Bar Bonded 150x12.5mm Plain
IEC COMPOUND BAR 150mm WITHOUT HANDLE
A bimetal or compound bar 150 x 12.5mm made from two metals of different heat expansion coefficients bonded together face to face into a single strip of metal. The two metals are made obvious by their different colours - one coppery a...
Order code: HL0880-001
IEC Compound Bar Bonded 150x12.5mm with Handle
IEC COMPOUND BAR 150mm WITH HANDLE
A bimetal or compound bar 150 x 12.5mm made from two metals of different heat expansion coefficients bonded together face to face into a single strip of metal. The two metals are made obvious by their different colours - one coppery and ...
Order code: HL0881-001
IEC Bar Breaker Rods Cast Iron
IEC CAST IRON BAR BREAKER RODS
A pack of 10 replacement cast iron rods for the IEC Bar Breaker.
A rod fits through a hole in the bar breaker and when the bar is heated and expands, the cast iron rod breaks with a loud snap.
Order code: PA0230-010
IEC Induction Kit Iron Bar Long 96mm
IEC HODSON INDUCTION KIT LONG IRON BAR 96mm
A long 16x16x96mm iron bar for DC or demonstration of AC circulating currents in iron cores and iron losses compatible with the EM1973-001 IEC Hodson Induction Kit.
Order code: PA1973-022
IEC Induction Kit Iron Bar Short 48mm
IEC HODSON INDUCTION KIT SHORT IRON BAR 48mm
A short 16x16x48mm iron bar for making AC and DC magnets or eddy current disc demonstration compatible with the EM1973-001 IEC Hodson Induction Kit.
Order code: PA1973-024
IEC Induction Kit - Bar Magnet 75mm Long
IEC HODSON INDUCTION KIT 75mm BAR MAGNET
A 12x8x75mmL single Alnico bar magnet for general use as well as studies with the EM1973-001 IEC Hodson Induction Kit.
Note: Colours may vary.
PA2097-001 is a pair of these magnets in a vial.
Order code: PA1973-052
IEC LaserView Straight Bar
IEC LASERVIEW STRAIGHT BAR
The 245x10x15mm long straight bar included in the HL1985-001 IEC LaserView Kit.
The specially formulated plastic shows the laser beam passing through it.
Ideal for teaching the basics of fibre optic data transmission and providing an easily ...
Order code: PA1985-210
IEC LaserView Curved Bar
IEC LASERVIEW CURVED BAR
The 245x10x15mm long curved bar included in the HL1985-001 IEC LaserView Kit.
The specially formulated plastic shows the laser beam passing through it.
Ideal for teaching the basics of fibre optic data transmission and providing an easily unde...
Order code: PA1985-211
IEC Ripple Tank Support Bar Stainless Steel for Ripple Maker
IEC RIPPLE TANK STAINLESS STEEL RIPPLER SUPPORT BAR
A stainless steel support bar for the variable speed rippler (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-006
IEC Ripple Tank Support Bar for Illuminator
IEC RIPPLE TANK STAINLESS STEEL SUPPORT BAR FOR ILLUMINATOR
A stainless steel bar to support the PA3430-013 illuminator (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-015
IEC Ripple Tank Support Bar Clamp Collar & Screw
IEC RIPPLE TANK SUPPORT BAR CLAMP COLLAR AND SCREW
A replacement clamp collar and screw for the PA3430-006 stainless steel bar that supports the variable speed rippler of the SW3430-001 IEC Ripple Tank
Order code: PA3430-016
IEC Spin Bar 25mm PTFE
Teflon coated spin bars for use with magnetic stirrers.
Spin bar 25mm long x 6mm diameter.
Order code: PA3802-005
IEC Spin Bar 40mm PTFE
Teflon coated spin bars for use with magnetic stirrers.
Spin bar 40mm long x 6mm diameter.
Order code: PA3802-010
IEC Alnico Bar Magnets - Pair 75x12x8mm
A PAIR OF STRONG ALNICO BAR MAGNETS that are well made and have strong magnetic fields. These magnets replace our SC6030 Alnico Bar Magnets which are no longer available. They are supplied in a plastic vial.
Features:
Colour coded north and south poles.
Approxima...
Order code: PA2097-001
IEC LaserView Kit 6 Lenses 2 Bars in Plastic Case
IEC LASERVIEW KIT
The IEC Laserview Kit is a useful set of specially moulded prisms and bars that permit a laser beam to be visible as it passes through the plastic. The lenses have the same shapes as those found in a Hodson Light Box. The big difference is that these len...
Order code: HL1985-001
69 results found for 'Bar'. |1|2|3 | Next | View 100 per page