Enlarge
Enlarge
Enlarge
Enlarge
IEC Power Supply 2 to 12V AC/DC Mini Pack
Order code: LB2629-001Purchase QTY: (Each) | 1+ | 4+ | ||||
---|---|---|---|---|---|---|
Scientrific's price | $214.00 | $214.00 | ||||
Educational special | $193.00 | $180.00 |
IEC MINI-PAK POWER SUPPLY
A compact general purpose power supply for student experiments where DC ripple and close voltage monitoring is not required. It provides switched AC and DC voltages at 2, 4, 6, 8, 10 and 12V AC and DC at about 5 to 6A. The DC output is full wave rectified but not filtered.
The mains switch on the back has an LED indicator on the front panel. In the event of an overload the LED changes from green to red until the overload is removed and the circuit breaker automatically resets. The housing has built in carry handles and rubber feet to prevent movement.
Includes self resetting thermal overload protection with LED indicator and audible click, 4mm safety sockets and removable mains cable.
Also available as LB2629C with included 850mm output leads terminated in both banana plugs and alligator clips for connecting the MINI-PAK to equipment.
Specifications
• 240V AC input
• Switched 2-12V AC/DC output in approximately 2V steps
• 5A current output
User Manual | IEC MINI-PAK Power Supply |
NOTE: This is a genuine IEC product.
We believe in supporting Australian industry and only sell genuine IEC products, we do NOT sell imported clones of IEC products.
Dimensions
- Product size: (HxWxD): 83x170x130mm
- Weight: 1.9kg
Last edited 20th Feb 2024
ACSSU020 - Physical Sciences - Light and Sound - Light and sound are produced by a range of sources and can be sensed
ACSPH044 - Thermal nuclear and electrical physics - Electrical circuits - Circuit analysis and design involve calculation of the potential difference across, the current in, and the power supplied to, components in series, parallel and series/parallel circuits
ACSPH039 - Thermal nuclear and electrical physics - Electrical circuits - Energy is conserved in the energy transfers and transformations that occur in an electrical circuit
ACSPH041 - Thermal nuclear and electrical physics - Electrical circuits - Energy is required to separate positive and negative charge carriers; charge separation produces an electrical potential difference that can be used to drive current in circuits
ACSPH042 - Thermal nuclear and electrical physics - Electrical circuits - Power is the rate at which energy is transformed by a circuit component; power enables quantitative analysis of energy transformations in the circuit
ACSPH043 - Thermal nuclear and electrical physics - Electrical circuits - Resistance for ohmic and nonohmic components is defined as the ratio of potential difference across the component to the current in the component
ACSPH040 - Thermal nuclear and electrical physics - Electrical circuits - The energy available to charges moving in an electrical circuit is measured using electric potential difference, which is defined as the change in potential energy per unit charge between two defined points in the circuit
ACSPH106 - Gravity and electromagnetism - Electromagnetism - Currentcarrying wires are surrounded by magnetic fields; these fields are utilised in solenoids and electromagnets
ACSPH108 - Gravity and electromagnetism - Electromagnetism - Magnets, magnetic materials, moving charges and currentcarrying wires experience a force in a magnetic field; this force is utilised in DC electric motors
ACSPH107 - Gravity and electromagnetism - Electromagnetism - The strength of the magnetic field produced by a current is called the magnetic flux density
ACSSU080 - Physical Sciences - Light and Sound - Light from a source forms shadows and can be absorbed, reflected and refracted
ACSSU097 - Physical Sciences - Electrical Circuits - Electrical energy can be transferred and transformed in electrical circuits and can be generated from a range of sources
ACSSU155 - Physical Sciences - Energy Forms - Energy appears in different forms, including movement (kinetic energy), heat and potential energy, and energy transformations and transfers cause change within systems
Click a curriculum code to see other products that relate.
  | |
Accessories / Spare Parts: | From |
SC5510 - Cables - Alligator Clips to Banana Plugs | $7.20 |
PA1764-010 - IEC Electronics Kit Alligator Banana Plug Combo | $4.40 |
  | |
Similar Products: | From |
LB2634-001 - IEC Power Supply 2 to 12V AC/DC 5 Amp LED Overload | $181.00 |
LB2629C - IEC Student Power Supply with Leads | $189.00 |
LB2633-001 - IEC Power Supply 2 to 12V AC/DC | $205.00 |
LB2631-001 - IEC Power Supply 2 to 12V AC/DC 10A | $265.00 |
LB2611-001 - IEC Power Supply Variable High Volt 0-300V DC | $483.00 |
LB2632-001 - IEC Power Supply 2 to 12V AC/DC 15 Amp | $425.00 |
LB2621-001 - IEC Power Supply 100/200V DC 6.3V AC | $171.00 |
LB2618-001 - IEC Power Supply 30mA/30V DC | $220.00 |
LB2635-001 - IEC Power Supply Selectavolt 1.5/3/6V DC | $261.00 |
LB2643-001 - IEC Power Supply 1.5 to 20V DC 10A | $525.00 |
Documents: Catalogue | May 2024 Web Catalogue | Experiment | Diffraction and Interference | Experiment | Electrical Energy | Experiment | SP34 AC Generator Motor | User Manual | IEC MINI-PAK Power Supply | |
Note: Prices do NOT include GST or freight