IEC ADVANCED ELECTRICITY KIT WITH SIGNAL & MOTOR/GENERATORS
The IEC Advanced Electricity Kit with signal generator and hand motor/generator contains all the components necessary to perform a wide range of important experiments with electricity. Students will gain hands-on experience with electric circuits, switches, lamps, voltage, current, resistance, Ohm’s law, series and parallel circuits, heating effect of electric current, fuses, conduction through liquids, magnetism, electromagnetism, inductance and capacitance.

The kit can also be used to study AC electricity, electromagnetic induction, laminated cores, transformers, inductors, eddy current losses and heating, impedance and reactance.

Components are easily visible to the students through clearly labelled, ventilated, transparent housings and smaller components are stored in strong transparent screw top vials. Connections are made with printed circuits and basic experiments use ‘D’ batteries while a compact power supply is provided for more advanced and AC experiments.

Supplied in a sturdy aluminium case with foam inserts and an extensive experiment manual including a full glossary of relevant electrical terms.

Electricity Kit Comparison:
• EM1763-001 IEC Electricity Standard Kit includes 3 Magnetic Field Demonstrators.
• EM1763-010 IEC Electricity Advanced Kit adds a digital Signal Generator, a hand driven AC/DC Motor Generator and upgrades to dual resistors, capacitors and lampholders.
• EM1763-020 IEC Electricity Advanced Kit adds a digital Signal Generator, a hand driven AC/DC Motor Generator, upgrades to dual resistors, capacitors and lampholders and replaces the 3 Magnetic Field Demonstrators with 2 Hodson Motor Kits.

Included:
• LB2629-001 IEC Power Supply
• LB3753-101 IEC Digital Signal Generator
• EM1758-001 IEC Hand driven AC/DC Motor/Generator
• 50 ohms 3W wire-wound potentiometer in housing
• 50 ohms dual resistor in housing
• 100 ohms dual resistor in housing
• 500 ohms dual resistor in housing
• 5uF dual capacitor in housing (+/-10%)
• 10uF dual capacitor in housing (+/-10%)
• 2 dual lamp holders in housing
• 2 single pole, two way switches in housing
• Connector box for alligator clips to hold wires
• Set 12 cables with moulded and stackable 4mm banana plugs
• Set 'U' and 'I' core with elastic bands for transformer study
• 300T, 2 x 600T and 1,200T coils to fit the 'U' and 'I' core
• 1 long and 2 short plain iron cores for magnetic experiments
• 1 aluminium disc and axle for eddy current brake experiment
• 3 digital multi-meters with 4mm banana plug cables
• 2 cell holders for D cells
• 2 plastic supports for holding iron cores to 'U' core
• 1 pair 75mmx12mmx8mm Alnico strong bar magnets
• EM2067-001 circular coil, straight conductor and solenoid coil magnetic field demonstrators with iron filings
• 10 plotting compasses
• 10 MES lamps for 2.5V 200mA
• 10 MES lamps for 12V 100mA
• 100m copper wire, 0.2mm diameter
• 100m Constantan resistance wire, 0.2mm diameter
• 50m 1A fuse wire, 0.05mm diameter
• 2 paper clips for connections etc
• 4 plain alligator clips that can be fitted to 4mm banana plugs
• 4 alligator clips fitted with 4mm banana plugs for holding all wires
• 70 x 20mm copper electrode plate
• 70 x 20mm zinc electrode plate
• 2 stainless steel 70 x 20mm conductivity plates
• Ring for Thompson’s Ring experiment
• Compass for determining North/South Pole of magnetic fields

NOTE: This is a genuine IEC product.
We believe in supporting Australian industry and only sell genuine IEC products, we do NOT sell imported clones of IEC products.

Last edited 20th Feb 2024