41 low relevance results shown for 'Short'. |1|2 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
41 low relevance results shown for 'Short'. |1|2 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
LED Red with 200mm Cables Pack of 10
Red LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
1.8 to 2.2V @ 20mA
Sold a...
Order code: SC33001
LED Green with 200mm Cables Pack of 10
Green LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
3.0 to 3.4V @ 20mA
Sold...
Order code: SC33002
LED Blue with 200mm Cables Pack of 10
Blue LED soldered to 200mm of red and black teflon insulated copper wire, the bare wire (cable) ends have been soldered to prevent fraying. To prevent shorting the soldered LED/wire joints are protected with heat shrink insulation.
Specifications:
3.0 to 3.4V @ 20mA
Sold ...
Order code: SC33003
LED Clear Body turns Green with 200mm Cables Pack of 5
A 'water clear' bodied LED that turns green when voltage is applied.
The benefit of the clear body is that when measuring the photon wavelength using a spectrometer or by a diffraction method then the wavelength is not filtered by a coloured case and so a pure wavelength can ...
Order code: SC33007C
LED Clear Body turns Blue with 200mm Cables Pack of 5
A 'water clear' bodied LED that turns blue when voltage is applied.
The benefit of the clear body is that when measuring the photon wavelength using a spectrometer or by a diffraction method then the wavelength is not filtered by a coloured case and so a pure wavelength can be...
Order code: SC33008C
Vernier Power Amplifier
VERNIER POWER AMPLIFIER
Use the Vernier Power Amplifier as a power supply for DC and AC circuit investigations or to drive devices such as speakers, lamps and small DC motors.The Power Amplifier takes small input signal – from a LabQuest 2, original LabQuest, or computer ...
Order code: PAMP
Vernier DTS Kit Without Track
VERNIER DTS KIT WITHOUT TRACK
Compatible with existing Vernier Combination Track/Optics Benches, the Vernier DTS Kit features two low friction, plastic carts, an ultra pulley and all of the necessary attachment accessories.
Vernier Dynamics Cart and Track System produc...
Order code: DTS-KIT
Vernier Go Direct DTS Kit Without Track
VERNIER GO DIRECT DTS KIT WITHOUT TRACK
Compatible with existing Vernier Combination Track/Optics Benches, the Vernier Go Direct DTS Kit features two low friction, plastic carts, an ultra pulley and all of the necessary attachment accessories. The built-in sensors in each...
Order code: DTS-KIT-GDX
Vernier DTS Motion Encoder Kit Without Track
VERNIER DTS MOTION ENCODER KIT WITHOUT TRACK
Compatible with existing Vernier Combination Track/Optics Benches, the Vernier DTS Motion Encoder Kit features two low friction, plastic carts, an ultra pulley and all of the necessary attachment accessories.
The DTS Motion ...
Order code: DTS-KIT-MEC
Vernier Combination 2.2m Track/Optics Bench
VERNIER COMBINATION 2.2m TRACK/OPTICS BENCH
Vernier's Combination Dynamics Track and Optical Bench is made from anodised aluminium, is extremely rigid and
will not sag under use. The track has a metric scale and is supplied with 2 x AL-VDS Adjustable Two Foot Levellers....
Order code: TRACK-LONG
Vernier Go Direct Calcium Ion-Selective Electrode
VERNIER GO DIRECT CALCIUM ION-SELECTIVE ELECTRODE
Vernier's Go Direct Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of calcium (Ca2+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
Da...
Order code: GDX-CA
Vernier Go Direct Chloride Ion-Selective Electrode
VERNIER GO DIRECT CHLORIDE ION-SELECTIVE ELECTRODE
Vernier's Go Direct Chloride Ion-Selective Electrode (ISE) is used to measure the concentration of chloride (Cl-) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
The ...
Order code: GDX-CL
Vernier Go Direct Potassium Ion-Selective Electrode
VERNIER GO DIRECT POTASSIUM ION-SELECTIVE ELECTRODE
Vernier's Go Direct Potassium Ion-Selective Electrode (ISE) can be used to measure the concentration of potassium (K+) ions in aqueous solutions. It connects via Bluetooth® wireless technology or wired via USB to your de...
Order code: GDX-K
Vernier Go Direct Ammonium Ion-Selective Electrode
VERNIER GO DIRECT AMMONIUM ION-SELECTIVE ELECTRODE
Vernier's Go Direct Ammonium Ion-Selective Electrode (ISE) can be used to measure the concentration of ammonium (NH4+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
...
Order code: GDX-NH4
Vernier Go Direct Nitrate Ion-Selective Electrode
VERNIER GO DIRECT NITRATE ION-SELECTIVE ELECTRODE
The Vernier Go Direct Nitrate Ion-Selective Electrode (ISE) can be used to measure the concentration of nitrate (NO3-) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
...
Order code: GDX-NO3
Vernier Go Direct Calcium Ion-Selective Electrode BNC
VERNIER GO DIRECT CALCIUM ION-SELECTIVE ELECTRODE BNC
This is a replacement electrode for GDX-CA Vernier Go Direct™ Calcium Ion-Selective Electrode
Connect the Vernier Go Direct™ Calcium Ion-Selective Electrode BNC ...
Order code: GDX-CA-BNC
Vernier Go Direct Chloride Ion-Selective Electrode BNC
VERNIER GO DIRECT CHLORIDE ION-SELECTIVE ELECTRODE BNC
This is a replacement electrode for GDX-CL Vernier Go Direct™ Chloride Ion-Selective Electrode
Connect the Vernier Go Direct™ Chloride Ion-Selective Electrode B...
Order code: GDX-CL-BNC
Vernier Go Direct Potassium Ion-Selective Electrode BNC
VERNIER GO DIRECT POTASSIUM ION-SELECTIVE ELECTRODE BNC
This is a replacement electrode for GDX-K Vernier Go Direct™ Potassium Ion-Selective Electrode
Connect the Vernier Go Direct Potassium Ion-Selective Electrode ...
Order code: GDX-K-BNC
Vernier Go Direct Ammonium Ion-Selective Electrode BNC
VERNIER GO DIRECT AMMONIUM ION-SELECTIVE ELECTRODE BNC
This is a replacement electrode for GDX-NH4 Vernier Go Direct™ Ammonium Ion-Selective Electrode
Connect the Vernier Go Direct™ Ammonium Ion-Selective Electrode ...
Order code: GDX-NH4-BNC
Vernier Go Direct Nitrate Ion-Selective Electrode BNC
VERNIER GO DIRECT NITRATE ION-SELECTIVE ELECTRODE BNC
This is a replacement electrode for GDX-NO3 Vernier Go Direct™ Nitrate Ion-Selective Electrode
Connect the Vernier Go Direct™ Nitrate Ion-Selective Electrode BNC...
Order code: GDX-NO3-BNC
Vernier Ammonium Ion-Selective Electrode
VERNIER AMMONIUM ION-SELECTIVE ELECTRODE
Vernier's Ammonium Ion-Selective Electrode (ISE) can be used to measure the concentration of ammonium (NH4+) in aqueous samples.
Use the Vernier Ammonium ISE to measure levels of ammonium ions introduced from fertilizers. It can...
Order code: NH4-BTA
Vernier Calcium Ion-Selective Electrode
VERNIER CALCIUM ION-SELECTIVE ELECTRODE
Vernier's Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of Calcium (Ca2+) in aqueous samples.
Data from the Vernier Calcium ISE can give a good indication of hardness of water (as Ca2+). The conce...
Order code: CA-BTA
Vernier Potassium Ion-Selective Electrode
VERNIER POTASSIUM ION-SELECTIVE ELECTRODE
The Vernier Potassium Ion-Selective Electrode can be used to measure the concentration of potassium (K+) ions in aqueous solutions.
The Vernier Potassium Ion-Selective Electrode makes the measurement of potassium ions portable....
Order code: K-BTA
Vernier Flow Rate Sensor
VERNIER FLOW RATE SENSOR
Vernier's Flow Rate Sensor allows students to easily measure the velocity of water when studying the discharge, flow patterns and sediment transport of a creek or river.
The Flow Rate Sensor includes 3 riser rods which enable the impeller to b...
Order code: FLO-BTA
Molymod Organic Student Set
MOLYMOD ORGANIC STUDENT SET.
The MMS-008 molecular model set contains 53 colour coded atoms and 64 links in a storage box. The set provides students with a hands-on activity to visually demonstrate organic molecules, empirical formula representations, organic structures a...
Order code: MMS-008
41 low relevance results shown for 'Short'. |1|2 | Next | View 100 per page